User`s manual

4-7 Changing How the Media Heating System Operates

Chapter 4 Feature Reference

Description

This makes the temperature setting for the media heating system when is dark.

"MENU" performs heating to the preset temperature at all times, without lowering the temperature when is

dark.

A setting of "35˚C" lowers the media heating system to a fixed temperature (35˚C) when

is dark. This tempera-

ture setting cannot be changed. When the temperature is set at less than 35˚C, however, the temperature is maintained

at the set value.

"OFF" switches off the media heating system when

is dark.

Default Setting

[PREHEATING]: 35˚C

Switching the Blower Fan On and Off

Procedure

➊

Hold down and press .

➋

Press .

➌

Press .

Use

to make the setting.

Press

to enable the setting.

➍

Press .

Press

to go back to the original screen.

Description

The blower fan hastens ink-drying by blowing moving air onto the media on the drying heater. The force of the moving

air cannot be adjusted.

When this is set to "ON" (the default setting), the fan starts when media is loaded and the loading lever is engaged.

Note, however, that when [DRYER] is set to "OFF," no operation starts when the loading lever is engaged.

When this is set to "OFF," the blower fan does not operate, regardless of the [DRYER] setting or the state of the loading

lever.

Default Setting

[BLOWER FAN]: ON

W 2600 mm

SETUP SHEET

HEATER MENU

FEED FOR DRY

HEATER MENU

BLOWER FAN

OFF