User`s manual

96
Chapter 4 Feature Reference
4-7 Changing How the Media Heating System Operates
Switching Off the Preheater, Print Heater, or Dryer
Procedure
➊
Press twice.
Use
to select the device.
Press
several times to select [OFF].
Press
to enable the setting.
➋
Press .
Press
to go back to the original screen.
Description
This makes the temperature settings for the media heating system (preheater, print heater, and dryer), as well as
switching these devices on or off. When this is set to "OFF," these devices do not operate at all.
You can also make this setting on the computer. When you have made the setting on the computer, the computer's
setting is used and the printer's setting is ignored.
Default Setting
[PRE] (preheater): 40˚C (104˚F)
[PRINT] (print heater): 40˚C (104˚F)
[DRYER]: 50˚C (122˚F)
Determining How the Media Heating System Operates
Procedure
➊
Hold down and press .
➋
Press .
➌
Press .
Use
to make the setting.
Press
to enable the setting.
➍
Press .
Press
to go back to the original screen.
W 2600 mm
SETUP SHEET
W 2600 mm
SETUP SHEET
PRE 45
OFF45
HEATER MENU
FEED FOR DRY
HEATER MENU
PREHEATING
PREHEATING
35 C
MENU