User`s manual

4-5 Accommodating Various Kinds of Media
Chapter 4 Feature Reference
89
➌
Use to move the heads.
➍
After positioning, close the front cover.
Press
to enable the setting.
➎
Press .
Press
to go back to the original screen.
Description
The media width can be sensed automatically for opaque media, but not for transparent media.
This means that the width and mounted location of the media must be set manually. Incorrect settings may cause ink
to be applied at locations where no media is present.
To quit making settings at the [SHEET POS.] menu, use
to select "CANCEL," then
close the front cover and press
.
Note that to keep the heads from drying out, the [SHEET POS.] menu ends automatically after a certain interval, even
if you’re still making settings there.
The settings for the media width and start position made here are effective only when [SHEET TYPE] is set to "CLEAR."
Selecting "OPAQUE" disables the settings, although the setting values are saved in memory. Choosing "CLEAR" again
enables the values set previously.
Default Setting
[SHEET TYPE]: OPAQUE
[SHEET WIDTH]: 2641 mm
Align this surface with the edge of the media.
SHEET POS.
CANCEL
SETUP SHEET