User`s manual

4-4 Optimizing Printing to Match Media Thickness
Chapter 4 Feature Reference
85
3. Enter the correction values that you read.
Enter the corresponding correction values for H1 through H6.
➊
Press .
➋
Press .
Use
to select.
Use
to set the correction values.
Press
to enable the setting.
4. Go back to the original screen.
Press .
Press
to go back to the original screen.
Description
This corrects, for each head, the minute misalignment that occurs in the bidirectional-printing mode. When further
correction is required, such as when adjustment made using [SIMPLE SETTING] do not enhance printing, use [DETAIL
SETTING] to make corrections for each head.
DETAIL SETTING
SETTING
H1 H2 H3
000
H4 H5 H6
00 0
W 2600 mm