User`s manual

Chapter 3 Maintenance and Adjustment

3-4 Replacing Consumable Parts

Replacing the Maintenance Liquid Cartridge

If this screen appears, replace the maintenance liquid cartridge within one month.

The maintenance liquid is used to clean the print heads and soiled wipers, and to

keep the wipers from drying out.

➢ To prevent the heads from drying out, finish this procedure in 10 minutes or

less.

➢ A warning beep sounds after 10 minutes. At this time, stop work, attach the

right side cover, and press . When the head-protection operation fin-

ishes, restart the procedure from the beginning.

CAUTION

Be sure to perform operations as specified by these instructions, and never touch

any area not specified in the instructions.

Sudden movement of the machine may cause injury.

Enter the cartridge-replacement mode.

➊

Remove any media from the platen and close the front

cover.

➋

Press .

Press

several times.

➌

Press .

Press

➍

Press .

Press

twice.

Press

➎

Preparations are complete when this screen appears.

Remove the right side cover and the maintenance cover.

➊

Remove the right side cover.

Press

Screws

MAINTENANCE

LIQUID LOW

SUB MENU

MAINTENANCE

MAINTE. LIQUID

REPLACE

MAINTE. LIQUID