User`s manual

3-1 Daily Care and Maintenance
Chapter 3 Maintenance and Adjustment
60
Cleaning
WARNING
Never use gasoline, alcohol, thinner, or any other flammable material.
Doing so may cause fire.
CAUTION
Before attempting cleaning, switch off the sub power and wait until the platen and
dryer cool (approximately 30 minutes).
Sudden movement of the machine may cause injury, or hot components may cause burns.
➢This machine is a precision device, and is sensitive to dust and dirt. Perform cleaning on a daily basis.
➢Clean by wiping with a cloth moistened by neutral detergent diluted with water then wrung dry.
➢Never attempt to oil or lubricate the machine.
Wipe away any buildup of ink or
grime on the media path.
Clean this area especially well.
Any soiling present here may im-
pair detection of media width.
Pinch rollers
Periodically wipe away any
grime. Failure to clean properly
may result in the transfer of grime
to the surface of media.
Grit rollers
Remove buildup of media and
other material using a brush.
Never use a metal brush.