User`s manual

Chapter 2 Operation
2-2 Loading and Cutting Off Media
35
➋
Mount the roll shaft in the paper pipe.
100 mm
Never overly loosen the screws for the end caps.
When an end cap screw is loosened completely, it stops
turning. Never apply more force beyond that point. At-
tempting to turn the screw with undue force may dam-
age the component securing the screw, making return
to the original state impossible.
Press in to fit on securely. Press in to fit on securely.
End cap
Hexagonal
wrench (large)
End cap
Hexagonal
wrench (large)
Bearing
Adjust the positioning of the end cap
to a value of 100 mm (4 in.).
* The scale on the media gauge is useful
for adjusting the positioning. Each scale
tick corresponds to 10 mm.
Spacer Roll shaft
Paper pipe