User`s manual

30
Chapter 2 Operation
30
2-1 Switching the Power On and Off
Switching the Power On and Off
This machine has four power switches. You switch on all four when using the machine.
When you finish printing, you turn off switches  and  as required. You also flip down the loading lever to the rear
of the machine.
Leave the two main power switches ( and ) on at all times, never switching either one off. (The machine
monitors the print heads for dryness and automatically performs cleaning while switched on.)
WARNING
When printing is not being performed, remove any loaded media or switch off the
power.
The continued application of heat at a single location may cause the release of toxic gases
from the media or pose a fire hazard.
Important Note on Switching Off the Power
Never switch off the printer's main power or unplug the power
cord suddenly while operation is in progress. Doing so may damage
the print heads. To turn off the power, switch off only the sub power
(except when you're performing tasks such as moving the machine).
If the main power is accidentally switched off, immediately turn the
main power and sub power back on.
Be sure to leave switched on at all times.
Turn this switch on after
closing the front cover. To
turn it off, hold down the
switch for one second or
longer.
Flip the loading lever down to
the rear when not in use.
 Main power switch
for the printer
 Main power switch
for the dryer
 Sub power switch
for the printer
 Power switches for
the media take-up
and feed systems