User`s manual

Chapter 1 Introduction

Dryer Power-cord Connector

This supplies power to the dryer. A 200 to 240 V electrical

outlet is required.

Printer Power-cord Connector

This supplies power to the printer unit and media take-up

and feed systems. A 200 to 240 V electrical outlet is required.

Operation Panel

You use this to perform various

operations.

☞ p 27 "Operation Panel"

Front Cover

Be sure to close this when you

perform printing.

Loading Lever

You operate this when you

load media.

Right Side Cover

You remove this when you perform

maintenance.

Dryer

This speeds up ink-drying. It com-

prises a drying heater that warms the

media and a blower fan that blows

moving air onto the surface of the

media.

Printer Main Power Switch

This is the main power switch for the printer unit.

Ethernet Connector

This is used to connect the

printer to a network.

Drain Bottle

This collects drained ink and other such fluids. Discard

any collected fluid before it overflows.

Dryer Main Power Switch

This is the main power switch for the dryer.

1-2 Part Names and Functions

Printer Unit

You can place a

cleaning kit here.

Cartridge Slots

This is where ink cartridges are in-

stalled. Installation is accomplished

by opening the cover.