User`s manual

20
Important Notes on Handling and Use
This machine is a precision device. To ensure the full performance of this machine, be sure to
observe the following important points. Failure to observe these may not only result in loss of
performance, but may also cause malfunction or breakdown.
Printer unit
This Machine Is a Precision Device
➢Handle carefully, and never subject the machine to impact or excessive force.
➢Never needlessly put your hand or fingers inside the cover, the ink-cartridge ports, or other internal areas of
the machine.
Install in a Suitable Location
➢Install in a location having the specified temperature and relative humidity.
➢Install in a quiet, stable location offering good operating conditions.
Leave the Main Power on at All Times
➢To keep the print heads from drying out, keep the main power switched on at all times, even when you're not
using the machine. For more information about switching the power on and off, read this manual carefully and
carry out the operation properly.
The Print Heads Are Delicate
➢Never needlessly touch or allow media to scrape them. Failure to handle with care may cause damage.
➢The print heads may be damaged if allowed to dry out. The machine prevents desiccation automatically, but
improper operation may render this feature inoperative. Operate properly, as specified in this manual.
➢Never allow the machine to stand with an ink cartridge removed. Remaining ink in the printer may harden and
clog the print heads.
➢The print heads are components that wear out. Periodic replacement is required, with the frequency of re-
placement depending on use.
This Machine Becomes Hot
➢Never cover the ventilation holes with cloth, tape, or anything else.
When Moving the Machine
➢Special preparations are required when moving the machine. Please check with your authorized Roland DG
Corp. dealer ahead of time.