Setup guide

5. Installing the Ink Cartridges
28

Use to select the unit of measure-
ment you want (for temperature).
Press
.

Wait for a screen like the one shown in the
gure to appear.
2. Remove the covers, then remove the lm that protects the heads from drying out.

Use to select the ink type.
Press
.
The screen shown in the gure appears.

Make sure the drain bottle is installed.
Make sure the tube is inserted far enough that it touches
the funnel.

Press .
The screen shown in the gure appears.

Preparations are complete when this screen
appears.
 Remove the right side cover.
 Remove the maintenance cover.
TEMP. UNIT
C
C
SELECT INK TYPE
EXt i LcLm
NOW PROCESSING..
SELECT INK TYPE
EXt i LcLm
INSTALL
DRAIN BOTTLE
FILLING INK...
>>
REMOVE FILM
FROM CAP
Screws
Screws
Tube
Right side cover
Maintenance
cover
Approx. 30 seconds
Drain bottle
Funnel