User Manual

ManualsBrandsRoland Professional A/V ManualsVideo MixerROLAND XS1HD Multi-Format Matrix Switcher

Panel Descriptions

Top Panel/Front Panel

p. 17

p. 21

p. 15

p. 19, 20

[MEMORY] button

This button turns the memory function on/o. If this

is on, up to 16 sets of the video/audio settings and the

state of the operation panel can be saved and recalled.

5 Save (lit red); Long-press the button

5 Recall (lit green): Press the button

* When the memory function is on, the cross-point

buttons operate as memory select buttons 1–16.

HDCP indicator

This indicator is lit, blinking, or unlit according to the

HDCP (copy protection) setting and according to

whether an HDCP-compliant device is connected.

p. 10

SETUP area

[MENU] button

Turning this button on (lit) makes a menu (OSD)

appear on the monitor that is connected to the

VIDEO OUTPUT 4 connector.

If you’ve moved to a lower-level item of the menu,

this button returns you to the next higher level.

[ENTER] button

This button moves to a lower-level menu, or

executes an operation.

[CURSOR] knob

This knob selects a menu category or item.

[VALUE] knob

This knob changes the value of a menu item.

Video fader

When the screen mode is “switcher mode,” this

makes the preset video (the video to output next)

the nal output.

Cooling vent

Heat from inside the XS-1HD is

vented here to keep the unit from

overheating.

NOTE

Do not block the cooling vent. If the cooling vent is

blocked, the interior of the XS-1HD might overheat,

causing it to malfunction.

SCREEN MODE indicators

These indicators show the current screen mode.

p. 12

QUICK EDIT area

[VIDEO], [AUDIO] buttons

These buttons turn on/o the quick edit function

for video or audio. When the function is on, you

can use the operation panel to adjust the video

or audio.

[C1], [C2], [C3] knobs

These knobs adjust the value of the corresponding

menu item.

* If the quick edit function is on, use the cross-point

buttons to select the operation that these knobs

will perform.

[AUTO] button

When the screen mode is “switcher mode,” this button

automatically switches between the nal output video

and the preset video (the video to output next).