User Manual

23
Other Functions
Formatting a USB Flash Drive
The rst time that you use a USB ash drive, you
must use the XS-1HD to format it.
NOTE
5 A USB ash drive that was not formatted by the XS-1HD
will not be recognized.
5 Never turn o the power or remove the USB ash drive
while the message “Processing.” is shown.
5 Use a commercially available USB ash drive or a
USB ash drive sold by Roland. However, we cannot
guarantee that all commercially available USB ash
drives will work with this unit.
5 When you format a USB ash drive, all data on that USB
ash drive is erased. If the drive contains important data,
back it up to your computer before you format the drive.
Connecting
1. Connect the USB ash drive to the USB MEMORY
port.
* Ensure that the USB ash drive is oriented
correctly, and insert it all the way into the
port. Do not use excessive force.
Formatting
1. Press the [MENU] button g “File” g select
“Format” and press the [ENTER] button.
2. If the message “USB Memory Format” appears,
use the [CURSOR] knob to select “Execute,” and
press the [ENTER] button.
The USB ash drive is formatted.
3. When the message “Completed.” appears, press
the [ENTER] button.
4. Press the [MENU] button several times to close
the menu.
Returning to the Factory Settings
(Factory Reset)
Here’s how you can return the settings of the XS-1HD
to their factory-set state. If following the procedures
described in this manual does not cause the result
you expect, try executing a factory reset.
NOTE
When you execute a factory reset, all of the settings you
made and the settings you saved in memory (p. 21) are
lost.
1. Press the [MENU] button g “System” g select
“Factory Reset” and press the [ENTER] button.
2. If the message “Factory Reset” appears, use the
[CURSOR] knob to select “Execute,” and press
the [ENTER] button.
Factory reset is executed.
3. When the message “Completed.” appears, press
the [ENTER] button.
4. Press the [MENU] button several times to close
the menu.