User Manual

19
Other Functions
Using Quick Edit to Adjust Video or Audio
Quick edit is a function that lets you adjust the video or audio from the operation panel without having to
display the menu.
Using the Video Quick Edit
You can adjust the input or output video’s quality, scaling, and the PinP inset screen’s position and size.
1. Press the [VIDEO] button to turn video quick
edit on (lit).
2. Use the cross-point buttons of the XPT1 row
and XPT2 row to select the menu item that you
want to operate.
The selected button is lit red.
3. Use the cross-point buttons of the XPT4 row
to select the input or output channel that you
want to operate.
The selected button is lit red.
4. Use the [C1], [C2], and [C3] knobs to adjust the
values.
5. To turn o video quick edit, press the [VIDEO]
button once again.
MEMO
5 By turning a [C1], [C2], or [C3] knob while pressing it, you
can change the value by a larger amount.
5 If you hold down the [ENTER] button and press a [C1],
[C2], or [C3] knob, the corresponding menu item is reset
to the default value.
In matrix mode (p. 13)
XPT1, 2 XPT4 [C1] knob [C2] knob [C3] knob
OUTPUT POSITION
Output 1–4
H Position V Position Zoom
OUTPUT COLOR Brightness Contrast Saturation
INPUT POSITION
Input 1–4
H Position V Position Zoom
INPUT COLOR Brightness Contrast Saturation
In split mode (p. 14) or switcher mode (p. 15)
XPT1, 2 XPT4 [C1] knob [C2] knob [C3] knob
OUTPUT POSITION (no selection) H Position V Position Zoom
OUTPUT COLOR Output 1–4 Brightness Contrast Saturation
INPUT POSITION
Input 1–4
H Position V Position Zoom
INPUT COLOR Brightness Contrast Saturation
PinP WINDOW
XPT 1–4 (*1)
H Position V Position Zoom
PinP VIEW H Position V Position Zoom
KEY (no selection) Level Gain Type
(*1) In switcher mode there is no selection.
The buttons are shortcuts for the following menu items.
XPT1 OUTPUT POSITION INPUT POSITION PinP VIEW PinP WINDOW
XPT2 OUTPUT COLOR INPUT COLOR — KEY