User Manual

50
Menu Operations and Menu List
System menu
The settings for items shown in gray in the table are not saved to MEMORY buttons (1-1 through 5-5). You cannot save multiple settings for these
items using the MEMORY buttons. Only one setting per item can be saved to the V-40HD’s internal memory. Such settings are saved when you exit
the menu. So don’t turn o the power while the menu is displayed.
HDCP [OFF], ON This turns the HDCP mode on/o. A conrmation screen appears when [ON] is selected.
Frame Rate [59.94Hz], 50Hz This selects the system frame rate.
Panel Mode A/B, [PGM-PST] This selects the operation mode. For PGM-PST and A/B, see p. 28 and p. 31.
Source Assign
Mode
OFF, [PGM Select],
PST Select
This changes the operation mode of the input assign buttons (p. 19).
NTSC Setup Level [0IRE], 7.5IRE
This selects the NTSC IRE level.
* An IRE is a unit used in the measurement of composite video signals and in particular this controls
black level setup. Typically 7.5 is used in US broadcasts while 0 is used in Japan.
Field Sync
Processing
OFF, [ON] Turn this ON to synchronize the elds of interlace input and the OUTPUT 1.
AUTO OFF OFF, [ON] When AUTO OFF is set to ON, the power is turned o after 240 minutes.
Memory Switch
Fade
OFF, [ON] When ON, this will automatically engage an output fade between memory selections.
Memory Protect [OFF], ON When ON, this disables the ability to save to MEMORY buttons.
Recall Lock [OFF], ON When ON, this disables recalling operation with the memory buttons.
Auto Memory [OFF], ON When ON, the current setting of the V-40HD is stored automatically at memory position 1-1.
MIDI Pressing [ENTER] changes to a detailed setup screen for MIDI.
Output Fade Pressing [ENTER] changes to a detailed setup screen for output fade.
PVW Label Pressing [ENTER] changes to an editing screen for PVW labels.
USB Memory
This makes settings related to USB memory devices.
Parameter Pressing [ENTER] lets you set parameters related to saving to/loading from a USB memory device.
Format Pressing [ENTER] changes to a formatting screen for the USB memory device.
LED Dimmer 0 - [7] This adjusts the brightness level of the top panel LEDs.
Video Fader
Calibrate
Pressing [ENTER] changes to a calibration screen for the video fader.
Menu Background 0 - [4] - 7 This sets the transparency of the menu background.
Menu Position [Left], Right
This changes the position of the menu display. You can also change this by holding down the [MENU]
button and pressing the left or right [CURSOR] button.
Test Pattern
[OFF],
Color Bar 75%,
Color Bar 100%,
Ramp, Step, Hatch
This turn o or turns on a selected test pattern.
Factory Reset This returns the V-40HD to its factory-default settings. Pressing [ENTER] displays a conrmation screen.
Detailed setup for MIDI
Status OFF, [Native], V-LINK Master, V-LINK Slave, MVC Slave This selects the MIDI remote-control mode of the V-40HD.
Through Output [OFF], ON This selects the operation of the MIDI OUT/THRU connector.
Channel [1] - 16 This selects the MIDI channel to use when Native is selected.
Detailed setup for output fade
Time 0.0s - [0.5s] - 10.0s This sets the duration of the fade.
Audio Follow OFF, [ON] This selects whether audio volume is interlinked with output fade.
Color Setting Use the following items to make settings related to the output fade color.
Red 0 - [16] - 255 This sets the red level.
Green 0 - [16] - 255 This sets the green level.
Blue 0 - [16] - 255 This sets the blue level.