User Manual

About Input/Output Formats

Using the Buttons to Change the Output Format for OUTPUT 1/2

Use the OUTPUT selectors on the top panel to change the output format. Press the [FORMAT] button to change the illuminated

indicator.

g.switch-output.eps

By default, the following signals are output. The signal format that is output changes according to the setting described in the

previous section.

Frame Rate 59.94 Hz 50 Hz

SD NTSC PAL

HD 1080/59.94i 1080/50i

RGB 1024 x 768/60 Hz 1024 x 768/75 Hz

Output Formats from the Connectors

Signals in the following formats can be output from the respective output connectors on the V-40HD. Refer to Output Menu (p. 46).

OUTPUT 1/2

Frame Rate 59.94 Hz 50 Hz

COMPOSITE (*1)(*2) NTSC PAL

COMPONENT (*2) 480/59.94p, 720/59.94p, 1080/59.94p 576/50p, 720/50p, 1080/50p

RGB (*2)

640 x 480/60 Hz, 800 x 600/60 Hz, 1024 x 768/60 Hz,

1280 x 768/60 Hz, 1280 x 1024/60 Hz, 1366 x 768/60 Hz,

1400 x 1050/60 Hz, 1600 x 1200/60 Hz,

1920 x 1200/60 Hz (Reduced Blanking)

640 x 480/75 Hz, 800 x 600/75 Hz, 1024 x 768/75 Hz,

1280 x 768/75 Hz, 1280 x 1024/75 Hz, 1366 x 768/75 Hz,

1400 x 1050/75 Hz, 1600 x 1200/60 Hz,

1920 x 1200/60 Hz (Reduced Blanking)

HDMI

480/59,94i, 480/59.94p, 720/59.94p, 1080/59.94i, 1080/59.94p 576/50i, 576/50p, 720/50p, 1080/50i, 1080/50p

640 x 480/60 Hz, 800 x 600/60 Hz, 1024 x 768/60 Hz,

1280 x 768/60 Hz, 1280 x 1024/60 Hz, 1366 x 768/60 Hz,

1400 x 1050/60 Hz, 1600 x 1200/60 Hz,

1920 x 1200/60 Hz (Reduced Blanking)

640 x 480/75 Hz, 800 x 600/75 Hz, 1024 x 768/75 Hz,

1280 x 768/75 Hz, 1280 x 1024/75 Hz, 1366 x 768/75 Hz,

1400 x 1050/75 Hz, 1600 x 1200/60 Hz,

1920 x 1200/60 Hz (Reduced Blanking)

*1 : OUTPUT 1 only

*2 : No output while the HDCP setting is ON (p. 26).

PVW OUT

Frame Rate 59.94 Hz 50 Hz

HDMI 1920 x 1080/60 Hz

* HDMI audio output format of OUTPUT 1/2 and PVW OUT is Linear PCM, 24 bits/48 kHz, 2ch.