MSDS

06/23/2015
EN (English US)
4/8
Compressor Oil
Safety Data Sheet
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations Version:compoil.001
Materials for Protective Clothing: Chemically resistant materials and fabrics.
Hand Protection: Wear chemically resistant protective gloves.
Eye Protection: Chemical goggles or safety glasses.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: Use a NIOSH-approved respirator or self-contained breathing apparatus whenever exposure may exceed
established Occupational Exposure Limits.
Environmental Exposure Controls: Do not allow the product to be released into the environment.
Consumer Exposure Controls: Do not eat, drink or smoke during use.
SECTI O N 9: PH YSICAL A ND CHEMICAL PROPERT IES
9.1. Information on Basic Physical and Chemical Properties
Physical State
:
Liquid
Appearance
:
Amber
Odor
:
Slight Hydrocarbon
Odor Threshold
:
Not available
pH
:
Not available
Evaporation Rate
:
Not available
Melting Point
:
Not available
Boiling Point
:
Not available
Flash Point
:
204C / 400C
Auto-ignition Temperature
:
Not available
Decomposition Temperature
:
Not available
Flammability (solid, gas)
:
Not available
Lower Flammable Limit
:
Not available
Upper Flammable Limit
:
Not available
Vapor Pressure
:
Not available
Relative Vapor Density at 20 °C
:
Not available
Relative Density
:
Not available
Specific Gravity
:
0.85
Solubility
:
Negligible
Partition Coefficient: N-Octanol/Water
:
Not available
Viscosity
:
Not available
Viscosity, Kinematic
:
Not available
Explosive Properties
:
Product is not explosive
Explosion Data – Sensitivity to Mechanical Impact
:
Not expected to present an explosion hazard due to mechanical impact
Explosion Data – Sensitivity to Static Discharge
:
Not expected to present an explosion hazard due to static discharge
SECTI O N 10: STABILI T Y A ND REA CT IVI T Y
10.1. Reactivity: Hazardous reactions will not occur under normal conditions.
10.2. Chemical Stability: Stable under recommended handling and storage conditions (see section 7).
10.3. Possibility of Hazardous Reactions: Hazardous polymerization will not occur.
10.4. Conditions to Avoid: Direct sunlight, extremely high or low temperatures, heat, hot surfaces, sparks, open flames,
incompatible materials, and other ignition sources.
10.5. Incompatible Materials: Strong acids, strong bases, strong oxidizers.