MSDS

06/23/2015
EN (English US)
3/8
Compressor Oil
Safety Data Sheet
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations Version:compoil.001
SECTI O N 6: A CC IDEN T AL RELEASE M EASURES
6.1. Personal Precautions, Protective Equipment and Emergency Procedures
General Measures: Avoid all contact with skin, eyes, or clothing. Avoid breathing (vapor, mist, spray).
6.1.1. For Non-Emergency Personnel
Protective Equipment: Use appropriate personal protection equipment (PPE).
Emergency Procedures: Evacuate unnecessary personnel.
6.1.2. For Emergency Personnel
Protective Equipment: Equip cleanup crew with proper protection.
Emergency Procedures: Stop leak if safe to do so. Eliminate ignition sources. Ventilate area.
6.2. Environmental Precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and Material for Containment and Cleaning Up
For Containment: Contain any spills with dikes or absorbents to prevent migration and entry into sewers or streams.
Methods for Cleaning Up: Clean up spills immediately and dispose of waste safely. Spills should be contained with mechanical
barriers. Transfer spilled material to a suitable container for disposal. Contact competent authorities after a spill.
6.4. Reference to Other Sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTI O N 7: HANDLIN G A ND STO RA G E
7.1. Precautions for Safe Handling
Additional Hazards When Processed: Any proposed use of this product in elevated-temperature processes should be thoroughly
evaluated to assure that safe operating conditions are established and maintained. Practice good housekeeping - spillage can be
slippery on smooth surface either wet or dry.
Hygiene Measures: Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas
with mild soap and water before eating, drinking or smoking and when leaving work.
7.2. Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures: Comply with applicable regulations.
Storage Conditions: Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Keep/Store away from
direct sunlight, extremely high or low temperatures and incompatible materials.
Incompatible Materials: Strong acids, strong bases, strong oxidizers.
7.3. Specific End Use(s)
Hydraulic Fluid.
SECTI O N 8: EXPOSURE CO NTR O LS/ PER SONAL PROTECT I O N
8.1. Control Parameters
For substances listed in section 3 that are not listed here, there are no established Exposure limits from the manufacturer, supplier,
importer, or the appropriate advisory agency including: ACGIH (TLV), NIOSH (REL), OSHA (PEL), Canadian provincial governments, or
the Mexican government.
8.2. Exposure Controls
Appropriate Engineering Controls: Ensure adequate ventilation, especially in confined areas. Emergency eye wash fountains and
safety showers should be available in the immediate vicinity of any potential exposure. Ensure all national/local regulations are
observed.
Personal Protective Equipment: Protective goggles. Gloves.