User manual

WisDom User Manual 57
Appendix A: System Troubles
The following table lists some of the possible trouble conditions,
their descriptions, and recommended responses.
To check for troubles in the system press
; an
opening message "System Troubles" followed by a list of
current trouble messages will be heard. If the list of troubles is
empty, the message "No System Troubles" is heard.
Trouble message will also be announced after a confirmed
disarming message or if a new trouble occurs during the
disarming procedure.
NOTE:
The installer can set or unset the System Trouble Message option.
Trouble Description LCD
Display
Message Response
MAIN TROUBLES
Auxiliary
Failure
The panel's
Auxiliary power,
used to supply
electric current
to designated
devices (e.g.
motion
detectors) has
failed.
TROUBLE:
MAIN:AUX TRBL
TROUBLE:
MAIN:AUX TRBL
"Auxiliary
Failure"
Contact your
installer.
Bell Loop
Trouble
The external
bell is
disconnected
TROUBLE:
MAIN:BELL LOOP
TROUBLE:
MAIN:BELL LOOP
"Bell Loop
Trouble"
Contact your
installer.
MS Report
Fail
Fail to
communicate
with the MS.
TROUBLE:
MS 1 CALL ERROR
TROUBLE:
MS 1 CALL ERROR
"Central
Station
Report Fail"
Contact your
installer
Clock Not
Set
The system's
clock has lost
track of the time
and/or date.
TROUBLE:
SYSTEM CLOCK
TROUBLE:
SYSTEM CLOCK
"Clock Not
Set"
Set the
system's time
and date, see
page 38