User manual

52 WisDom User Manual
Quick
Key
Function Description
two minutes during which the installer can enter
the programming menu and no report will be
made.
4 Delete
Remote
Message
Deletes a message that has been sent to the
LCD from the Upload/Download software.
5 Anti-Code If defined by your installer the WisDom can be
defined to be not ready to Arm after an alarm or
tamper condition. To restore the system to
Normal Operation mode, a technician code or an
Anti-code must be entered. Entering the code
supplied by the technician at this location will
restore the system to the Normal Operation
mode.
6 Duress
Restore
Deactivates a latched UO that has been
activated as a result of a duress code being
entered
3 View
1 Trouble Should be used when the system has detected a
problem, which is evidenced by the rapid
flashing of the TROUBLE LED.
2 Alarm
Memory
Allows the viewing of the five most recent alarm
conditions stored by the system, by partition.
3 Partition
Status
Allows the viewing of the partition’s status,
troubles, and all “not ready” zones.
4 Zone
Status
Allows the display of all system zones and their
current status.
5 Event Log Allows the viewing of significant system events
including date and time.