User manual

WisDom User Manual 51
Quick
Key
Function Description
2 Follow Me
(FM)
This option allows to program 2 options
regarding the follow Me number:
1) Define FM: Define up to 4 Follow Me
telephone numbers. In case of an alarm the
system will generate a call to the designated
number. For more information refer to page 39
2) Terminate FM: If Follow-Me Phone
Number(s) were chosen, their operation can be
terminated. Use this function when an alarm has
been tripped and there is no need to utilize the
Follow-Me phone call.
3 Monitoring
Station
(MS)
Control
Allows user control of operation relating to
operation with the MS:
1) Initiate call: By initiating a call to your alarm
company, this allows them to perform a remote
programming operation on your system
2) Hand over: Similar in intent to Initiate Call
(above). Hand Over allows your alarm company
to call you and, during the call, "hand over" to
them the control of your security system
3) Enable U/D: Each time this function is
enabled, your alarm company may subsequently
gain a single remote access to your system to
make any required programming changes.
4) Cancel report: Sends a "Cancel Alarm"
report message to the Central Station. This
function is used if the alarm was activated by
mistake.
5) Void rep. Prog: For installer use only!. Some
protocols have a report code to the monitoring
station for entering and exiting the installer
programming. To avoid the entering report and
save time, this function postpones the report for