User manual

WisDom User Manual 47

Using the Arm / Stay Keys to Program Macro Keys

In step 5 of the previous procedure, the and

keys are used to toggle between and enter characters that

represent keys on the WisDom keypad. The following is a list of

these characters and the keys they represent:

Character Represents

0-9

The Numerical keys from 0 to 9.

A-C

The Macro keys from A to C.

The

key - Away arming.

The

key - Stay arming.

The

key.

The

key.

NOTE:

You can also use the Numerical keys to enter numbers when programming

Macro keys. Use the [ ] and [ ] keys to move the cursor.

When your required character is displayed, press to

move the cursor to the next field in the LCD, where you can

enter the next character in the series.

When you have finished entering a series of characters, ensure

that the cursor is placed in the field after the last character in the

series by pressing

again.

 To Activate a Macro key:

Press the numeric key [1/2/3] for 2 seconds to activate

Macro [A/B/C] respectively. A macro activation

confirmation message will be heard: [Macro X] Activated “

If there is no pre-programmed macro for the key system the

following message will be heard: “Macro Not Defined”