User manual

WisDom User Manual 45
Premises Operation of the Family
Message Center
The Family Message Center enables you to play and record a
memo message on the premises. The message is up to 8
seconds. When you record a new message the previous
message is deleted. During the recording process, a counter
appears on the WisDom LCD display, indicating the time left for
message recording.
 To record a message:
1) Press the button continuously for 2 seconds. The
Message LED will start a slow flash and the following
message is announced:
“Record Your Message After The Tone”.
2)
After a tone is heard talk into the microphone located on
the left corner of the WisDom from a distance of 3 cm. If
you finish your message before the time limit, press the
key again.
 To play a message:
Press the Play button. The recorded message will
begin playing automatically
Programming Macro Keys
The WisDom enables you to record a series of commands and
assign them to a Macro key. When the Macro key is pressed for
2 seconds, the recorded commands are executed from
beginning to end.
Before programming a Macro key, it is recommended to perform
your required series of commands, making a note of every key
you press while doing so. These keys will be entered in the form
of characters in step 4 of the procedure for programming the
Macro key. Up to 3 Macro key programs are available.