User manual

WisDom User Manual 43
Defining a User Limitation Program
A user limitation program automatically prevents certain users
from disarming the system during specified time intervals. By
default, all users of the system operate without this limitation.
When defining a user limitation program, you need to define the
following three parameters: Users, Time Schedule, and Label.
NOTE:
By default, all users are not restricted.
 To define a user limitation program:
1)
Repeat stages 1- 4 of the Arming/Disarming schedule
programming procedure.
2)
Select [3] User Limit
3)
Follow the LCD display messages that will guide you
through the programming procedure
Setting Local Announcement Messages
Upon event occurrence, the WisDom can announce the
security situation to occupants of the premises by sounding a
local Announcement message. This Announcement message
can be enabled or disabled, per event.
By default, all Announcement messages are enabled.
 To enable and disable Announcement messages:
1)
Press [][7] from the main user menu to enter the Voice
Message menu.
2)
Enter your user code followed by
3)
From the Voice Msg. menu, select [4] Announce
Message.
4)
The Announce Message menu lists system events.