User manual

42 WisDom User Manual
NOTES:
1. When defining the time intervals for each day of the week you can select
[8] All to set the same time intervals for every day in the week.
2. Use key to enter [Y] when requested. For example when defining
a partition that will be automatically armed and disarmed
3. Leave the time at 00:00 if you do not want to perform the automation
during the current interval for the current day
Defining a UO Activation Program
A UO (home appliance) activation program automatically
activates and deactivates UOs during your required intervals. In
each program, you can define four UOs to operate
simultaneously.
When defining a UO activation program, you need to define the
following parameters: UOs, Time Schedule, Vacation, and
Label.
 To define a UO activation program:
1)
Repeat stages 1- 4 of the Arming/Disarming schedule
programming procedure.
2)
Select [2] UO On/Off
3)
Follow the LCD display messages that will guide you
through the programming procedure
NOTES:
The [3] VACATION option for the UO scheduling program defines the way in
which the group of UOs are activated during a vacation:
N: During vacation, UOs are activated in the same way as defined in the time
windows of the week.
Y: UOs are activated during the vacation according to the time schedule
defined in the next step (vacation definition).