User manual

WisDom User Manual 37
4)
Select [1] Define/Update.
5)
Enter the two-digit User Index number to which you want to
assign a user code. For example, to assign a user code to
user index number 6, press [
] [ ].
NOTE:
In the WisDom system, the User Index number is from 00 to 32.
The User Index number 00 belongs to the Grand Master user code.
6)
Enter the new code and press
.
7)
If successful, a single confirmation beep is sounded, and a
message is displayed. If not, three quick error beeps are
sounded.
8)
Repeat the above steps for additional codes until complete.
9)
When all codes are entered press
quickly to
reset and exit the User Functions menu.
Deleting User Codes
At times, it may be desirable to completely delete a user code.
Note that it is impossible to delete the Master Code (although it
can be changed).
The system must be disarmed in order to delete user codes.
 To delete a user code:
1)
Follow steps 1-5 in the previous procedure.
2)
When requested to enter new code press
followed
by
.
3)
If successful, a single confirmation beep is sounded, and
a message is displayed. If not, three quick error beeps
are sounded.
4)
Repeat the above steps for additional codes until
complete.
5)
When all required codes are deleted, press
quickly to reset and exit the User Functions menu.