User manual

36 WisDom User Manual
Chapter 5: User Codes
To perform many of the WisDom functions, a security code
(often called a user code) must used. Each individual using the
system is assigned a user code, which, in turn, is linked to an
Authority Level. Those with a "higher authority" have access to a
greater number of system functions, while those with a "lower
authority" are more restricted in what they may do. There are
eight different Authority Levels available for users of the
WisDom.
User codes may have variable lengths up to 6 digits, according
to your installer's definition. The WisDom can support up to 32
different user codes.
Your WisDom was given a Grand Master Code of 1-2-3-4
during manufacturing. Unless your alarm company has already
changed it to suit your preference, it's best to modify this code to
one that is unique and personalized as herein described.
NOTE:
To define the authority levels refer to your installer.
Setting / Changing User Codes
The user assigned the Grand Master Authority Level can change
all user codes but cannot view the digits in the user codes.
Users with other Authority Levels can only
change their own
codes. The system must be disarmed in order to set or change
user codes.
 To set/change a user code:
1)
From the User Functions menu, select [5] Codes.
2)
Enter code and press
.
NOTE:
If you enter wrong user code, the keypad produces three short beeps
and the “Wrong Code. Please Try Again” message will be heard. If
so, press [ ] [ ] quickly and re-enter the above sequence
correctly.
3)
Select [1] for User Codes.