User manual

WisDom User Manual 35
TIPS:
To repeat the Event announcement message, press [#].
To bypass the Event announcement message and go directly to the
Acknowledge menu, press [].
Acknowledge Menu
After the Event announcement message, the following list of
options is announced; some of which may require your user
code authorization.
NOTE:
If an invalid code is entered 3 consecutive times, the system hangs up and
this FM number is locked for 15 minutes. During this time, no calls are
initiated to this FM phone.
If a valid user code is not entered within 10 seconds, the system hangs up.
Operation Digit
Acknowledge Message
Acknowledging an Event means that you have received a
message from the security alarm system about a relevant
event in the system and want to confirm this. After you
acknowledge an event, the system calls the next FM
number. If you do not acknowledge the event, the system
continues to call you a predefined number of times.
[1]
To acknowledge and stop all dialing
This option acknowledges the event and stops the system
from calling to the next FM numbers to report the event.
[2]
[Code]
To acknowledge and access the Operations menu
The Operations menu lists the available options for
remotely operating your system as described on page 30.
[3]
[Code]
To Listen and Talk
This option enables you to perform the remote listen and
talk option as described on page 32
[6]
[Code]
NOTE:
The Access to the Operations Menu and Listen and Talk options are only
announced if your FM number has permission to access these options. For more
information refer to page 39.
To repeat the event message
[#]