User manual

32 WisDom User Manual
Two Way Communication
The Listen and Talk options enable you to remotely and silently
listen in to your premises in order to verify the cause of an event
occurrence, through the microphone. It also enables you to
remotely talk into your premises via the WisDom loudspeaker,
for example, to guide someone in distress.
Unlike regular phone conversations listening and talking cannot
be performed simultaneously. The WisDom allows one-way
speech at a time. You must press [1] prior to listening and [2]
prior to talking in order to be heard in the premises.
NOTE:
When entering the Listen and Talk option you have 2 minutes time out in
which to listen or talk, after each press on [1] or [2] options. After this time,
the Acknowledge menu or the Operations menu is repeated.
 To listen and talk:
1)
From the Operations/Acknowledge menu, press [6]. The
following messages are announced:
“To Listen In press 1, To Talk press 2, To return to the
previous menu, Press [
 ]”
NOTE:
The bell alarm resumes sounding 2 minutes after the last key has been
pressed, and the previous menu is announced.
2)
To listen In: [6][1]
At any time, you can press [1] to listen in to the premises.
The bell alarm is silenced. If you talk, your voice cannot be
heard in the premises.
3)
To Talk: [6][2]
At any time, you can press [2] and talk into the telephone.
The bell alarm is silenced, and your voice is heard in the
premises. During Talking mode you can’t hear sounds from
the premises.
NOTE:
At the premises, when you switch from Talk mode to Listen mode, the
WisDom’s speaker sounds a beep. During Talking mode the Message LED
flashes rapidly.
4)
To stop 2 way communication:
Press [ ] to stop listening and talking and return to the
Operations menu.