User manual

WisDom User Manual 31
Following is the list of remote operations options:
Operation Quick Key Combination
Arming All Partitions [1][1]
Arming selected Partition [1][9][Partition No]
Disarming All Partitions [2][2]
Disarming selected Partition [2][9][Partition No]
Changing Zone Bypass Status [3][Zone No][#][9]
Operating Outputs [4][Output No]
Changing FM Numbers
[5][FM No][#][2]
Listen-In to the premises
[6][1]
Talking into the premises
[6][2]
Playing a Memo Message
[7][1]
Recording a Memo Message
[7][2]
Exiting the System
[0]
To return to the previous menu
[]
To repeat the menu options
[#]
NOTES:
Arming:
When performing forced arming, remember that it results in leaving a partition
unsecured.
Zone Bypassing:
 Bypassing a zone results in leaving the partition to which that zone belongs
unsecured.
 A bypassed zone’s status is automatically returned to unbypassed when
the partition to which it belongs is disarmed.
 The Bypass option can be disabled by your installer, in which case it is not
announced as an option in the Operations menu.
Outputs Operation:
 The Utility Output option applies to Utility Outputs that are defined as
Follow Code. Ask your installer for details about defining Utility Outputs in
this way.
 There are 2 types of outputs which behaves differently when activated:
 Latched output: Remains activated until it is deactivated.
 Pulsed output: Remains activated for a predefined number of
seconds, after which it is automatically deactivated.
Ask your installer which of your outputs are defined as latched and which are
defined as pulsed.
Changing Follow Me Numbers:
 Only the Grand Master, Master and Manager authority levels have
permission to change FM numbers.
 For more information regarding Follow Me numbers refer to page 39