User manual

WisDom User Manual 27

Partition Disarming

Partition disarming enables you to disarm individual partitions

within an armed system.

 To disarm partitions:

Select the required partition by pressing

followed by

the partition number [1/2/3].

Enter your user code and press

to confirm. A

confirmation message will be heard:

“{System / [Partition x]} disarmed “

Repeat the above steps to disarm other partitions

Example: To disarm partition 3 with code 1234 press:

3 1-2-3-4

NOTE:

If the Arm LED is flashing after disarming, check the display for activated

(alarmed) zones before proceeding.

Duress Disarming

If you are ever coerced into disarming your system, you can

comply with the intruder's wishes while sending a silent duress

alarm to the Central Station. To do so, you must use a special

duress code, which when used, will disarm the system in the

regular manner, while simultaneously transmitting the duress

alarm.To use a duress code, add 1 to the last digit of your user

code, as shown in the table below:

User Code Duress Code

1-2-3-4 1-2-3-5

5-6-7-8 5-6-7-9

6-7-8-9 6-7-8-0

IMPORTANT:

Under no circumstances must the duress code be used haphazardly or without

reason. Central Stations, along with Police Departments, treat duress codes

very seriously and take immediate action