User manual

24 WisDom User Manual
Partition Arming
One of the WisDom’s advantages is its ability to divide the
system to up to 3 partitions. Each partition may be viewed as a
separate security system, each of which can be armed and
disarmed individually regardless of the condition of the other.
Partitions can be armed/disarmed one at a time, or all at once,
and each partition can be armed at Stay or Away.
NOTES:
Common Zones - Partitioned systems can share common zones. For
example, a shared front door to two family houses must be available to both
families and is therefore shared between them.
A common zone(s) is armed only if all partitions sharing the zone(s) are armed.
The common zone(s) is disarmed if any of the partitions, to which the zone(s)
is assigned, is disarmed.
If the system is defined to work in Area mode, the common zone will be armed
if any partition sharing the zone is armed. The common zone will be disarmed if
all the partitions sharing the zone are disarmed.
For more information about common zones refer to your installer.
Only users that have been defined to operate multiple partitions
can operate more than one partition and arm/disarm all
partitions at once.
 To arm individual partitions:
1)
Check the Ready LED and make sure that the system is
ready to be armed.
2) Select the partition number to be armed by pressing
followed by the partition number [1/2/3]
3)
Enter your user code and then press
.
An arming announcement message or a Fail to arm
message will be heard as described in the section of
Away Arming.
4)
Repeat the above steps to arm additional partitions.