User manual

22 WisDom User Manual
Away Arming
Away arming prepares all of the system's intrusion detectors
to activate an alarm if violated, and is used when leaving the
premises.
 To away arm:
1)
Check the Ready LED and make sure that the system is
ready to be armed.
2)
Enter your user code and press
. All partitions
assigned to the code will be armed.
NOTE:
If defined by your installer press for quick arming.
3)
Leave the premises and close the door. The keypad
beeps and the Arm LED flashes while the system counts
down the Exit Delay time period (if defined). Once the Exit
Delay time count starts the following Message will be
heard:
"System In Arm Process, Please Exit Now".
4)
When the Exit Delay time period is up, the Arm LED lights
steadily and the following message will be announced:
“System Armed In Away”
NOTE:
Failing to arm the system due to a zone problem will be followed by the
message: "System Not Ready, Fail to Arm, Check, [Zone X]".
Failing to arm the system due to a reason other than a zone problem will be
followed by a general message prompting you to use the information displayed
on the LCD screen "System Not Ready, Fail to Arm, Check Display".