User manual

16 WisDom User Manual
READY LED
The Ready LED indicates whether or not the system's intrusion
zones are secured and ready to be armed.
Condition Description
ON
All intrusion zones are secure; the system
is ready to be armed.
OFF
One or more intrusion zones are not
secure, and the system is not ready to be
armed. Before the system can be armed,
the condition must be addressed.
-OR-
During several system troubles, for
example: For 3 minutes after power is
restored to the system (if defined by your
installer).
SLOW FLASH
Indicates the system is ready to be armed
while a specially designated entry/exit door
remains open.
BYPASS LED
The Bypass LED indicates if there are bypassed zones in the
system.
Condition Description
ON
At least one intrusion zone is bypassed, or
Stay mode is selected.
OFF
There are no bypassed zones in Disarm
mode
or the system is in Arm mode
(Although there are bypassed zones).