User manual

WisDom User Manual 15
LED Indicators
The six LED indicators found at the upper left provide typical
system indications, as discussed below. Some indicators have
additional functions, which are explained later on.
POWER LED
The Power LED indicates system operation.
Condition Description
ON
The system is operating properly from
commercial (AC) power and its backup
battery is in good condition.
OFF
No power to the system (AC or Battery)
RAPID FLASH
Indicates AC trouble.
SLOW FLASH
Indicates User menu or Battery trouble.
NOTE:
If a trouble condition exists, the Power LED will flash only when the system is in
disarmed state. Once the system is armed, a previously flashing Power LED
will light steadily.
ARM LED
The Arm LED indicates whether or not the system is armed.
Condition Description
ON
The system is fully or partially armed.
OFF
The system is fully disarmed.
SLOW FLASH
The system is in its Exit Delay time period.
RAPID FLASH
Indicates an alarm condition or after
disarming an alarmed system while the
display is in Alarm Memory mode. To
restore the display to Normal Operation
mode, press
.