Specifications

IMPORTANT – PLEASE COMPLY WITH THE
FOLLOWING OWNER PREPARATION STEPS PRIOR
TO OPERATION OF YOUR NEW ROKON:
1) READ AND BECOME THOROUGHLY FAMILIAR WITH THE MATERIAL
IN YOUR OWNERS MANUAL.
2) REDUCE THE TIRE PRESSURE TO 3
1
/2 PSI IN THE FRONT TIRE AND
2
1
/2 PSI IN THE REAR TIRE.
3) HANDLEBAR INSTALLATION: HANDLEBAR HAS BEEN DISASSEMBLED
FOR SHIPMENT. REINSTALL AND POSITION HANDLEBAR AND
TORQUE HANDLEBAR MOUNTING BOLTS TO 20 FT/LBS. ALL WIRES,
BRAKE CABLES AND THROTTLE CABLE MUST PASS BETWEEN
HANDLE BAR MOUNTING TOWERS.
4) COMPLETELY FILL CRANKCASE WITH SAE 10W-30/40 MOTOR OIL.
FOLLOW START UP PROCEDURES IN ENGINE MANUAL.
5) ADD UNLEADED FUEL TO TANK. USE SUPER UNLEADED FOR
OPERATION AT OR ABOVE 10,000 FEET.
6) DURING THE FIRST FOUR (4) HOURS OF OPERATION, INSPECT
THE DRIVE CHAINS FOR EXCESSIVE LOOSENING. ADJUST AND
LUBRICATE DRIVE CHAINS PER OWNERS MANUAL.
50 RAILROAD AVE
ROCHESTER, NH 03839
www.rokon.com
TEL: [phone] FAX: [phone]
56
ROKON INTERNATIONAL, 50 Railroad Ave., Rochester, New Hampshire 03839, U.S.A. Copyright 2004