Use Instructions

X/EN-4X/EN-3X/EN-2X/EN-1 X/EN-5
Cordless Vacuum Cleaner Product Performance Fault List
Name
The machine cannot be started under normal use
Rolling brush does not rotate under normal operation condition
The indicator light remains the same under normal use
Performance Fault
Cordless Vacuum Cleaner
The warranty period shall take effect from the date of purchase or the date of delivery (if the delivery date is a little later than the purchase date).
Keep your purchase invoice or relevant certificates as an important basis for the warranty service.
This policy may be updated from time to time to the extent permitted by law. For details, contact the local dealer.
Warranty Discription
Warranty Content
Main Machine
Filter
Type
Cordless Vacuum Cleaner
Warranty Content Warranty Time
24 Month
It is random material consumption, no warranty period
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
Product Hazardous Substances Declaration
Hazardous Substances
Part Name
Plastic Case
Circuit Board
Cable
Battery
Power Adapter
Magnet
This form is prepared in compliance with SJ/T 11364.
Pb Hg Cd Cr(VI) PBB PBDE
：Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB/T 26572.
：Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T 26572.
This product meets RoHS environmental protection requirements;At present, there is no mature technology in the world to replace or reduce the lead
content in electronic ceramics and copper alloys.The term of environmental protection marked by this product refers to that under normal use
conditions, the product contains harmful substances or elements that will not leak out.
This Attestation implies that the examined types are in accordance with the standards designated under the Use of hazardous substances
directive (RoHS) 2011/65/EU.
X/EN-7
Machine
1.Shift Button
2. Air Outlet
3. Power Switch
4. Battery Indicator
5. Status Indicator
6. Dust Cup
7. Release Button
8. Metal Connecting Rod
9. Release Button
Machine
10. Induction Light
11. Lighting
12. Charging Socket
13. Dust Cup Anti-trip
14. Dust Cup Release Button
15. Roller
16. Roller Release Button
17. Roller Brush
18. Anti-collision Strip
Accessories
①Electric Brush
②Mattress Brush
③Long Flat Suction+Sofa Brush
④Extension Hose
⑤Adapter
⑥Wall-fixed Charging Box
⑦Dust Cup Filter Element
⑧Cleaning Brush
⑨Carbon Fiber Rolling Brush
Illustrations on Page 2、3
Product Usage
Press on the button of the power switch for 1 second to start the machine in normal mode;
During operation state, click the shift button or power switch button, and the suction power will switch among the normal mode, high speed
mode and powerful mode.
Power On/Off and Suction Power Switch
Usage of Rolling Brush
1. Flat cleaner head: use for cleaning doors and windows, stairs and other narrow gaps;
2. Stretch soft hose: use for hard-to-reach corner cleaning;
3. Electric Mattress Brush: Use for removing dust and mite on the bed, curtain and other home textiles;
4. Multifunctional Brush (Used with flat cleaner head): Use for cleaning dust of sofa, seat, cloest, window and the dust adhered to the furniture
surface.
Usage of Accessories
Installation of Wall-fixed Cordless Charging Box
When installing wall-fixed charging box, please contact the charging box contact with the contact of host first. After moving the host
to the wall of charging box, compare the installation hole position of charging box, then insert the expansion pipe and expansion
screw in turn. (When using the screws to fix wall-fixed charging box, please do not take off glue-separating paper and use it as reserved
screw-free installation.)
Step 1: Insert the expansion tube into the wall and fix the wall suction box with the expansion screw;
Step 2: Install the hole rubber plug;
Step 3: Fix the power cord on the wall suction box;
Step 4: Attach the host to the wall suction box and plug it into the power supply for charging.
Fixing of Vacuum Cleaner
1. Place the electric brush horizontally on the ground;
2. Move the vacuum cleaner main machine to adhere to fully adheres to the wall-fixed charging box.
When installing the wall-fixed charging box, please first measure the height of 92 cm from the ground, remove the foam cotton glue-separating paper from
the wall-fixed charging box, and stick the charging socket of the wall-fixed charging box downward at the measured position.
Quick Settings
2. Add a device
Open the home page of "ROIDMI Vacuum Cleaner" APP and select "
Add Device" on the page to add "ROIDMI Vacuum Cleaner". After
successful adding, you can find this device in the list of “My Device”;
1. Download APP
Search for "ROIDMI Vacuum Cleaner" APP in the App Store or scan
the following QR cord to download and install it ;
3. Bluetooth connection
Open the "ROIDMI Vacuum Cleaner" APP and the system will match
and connect device automatically;
4. Buy more
Please download the "ROIDMI Vacuum Cleaner" APP, or scan the
QR code right to subscribe ROIDMI Wechat Official account for
buying more products.
This product is compatible with ROIDMI vacuum cleaner platform,
this product with intelligent App connection, to support Android and
IOS systems.
About works with mijia
“Works with mijia” indicates the product can be connected and
interacted with MI HOME or MI AI. Please kindly notice that
"Works with mijia" provides App service only. Xiaomi and Mijia
are not responsible for any of the product manufacturing, safety
and regulatory standards, or quality supervision.
Scan code download Mijia APP
Product Installation
Installation of The Whole Machine And Accessories
1. Insert the electric ground brush and the metal connecting rod release button end into the corresponding interface end in the direction
of the icon arrow until you hear a click;
2. Insert the electric ground brush, electric squeegee brush, long flat suction, and extended hose release button end into the corresponding
interface end of the host in the direction of the icon arrow until you hear a click.
1. Soft velvet rolling brush can be used for floor tile,wooden floor and polish its surface. It is not recommended to clean carpet;
2. Carbon fiber rolling brush can be used for floor tile, floor and undercoat carpet.
Step 1: Measuring dimension ;
Step 2: Remove the glue-separating paper;
Step 3: Paste the wall suction box to the wall according to the measured height;
Step 4: Attach the host to the wall suction box and plug it into the power supply for charging.
Screw-free Installation of Wall-fixed Charging Box
* Whether the vacuum cleaner has Bluetooth connection function,
please refer to the actual configuration, has been connected to
Mijia for China.
Fault Description
Motor Not Working
Electric Rolling Brush Not Running
Suction Power Reduction of Vacuum Cleaner
Charger Indicator LEDs Not On or Not
Flashing During Charging
Small Roller of the Rolling Brush Stops
Running
X/EN-6
Product Troubleshooting
When the vacuum cleaner can't operate normally, you can troubleshoot by yourself or contact the customer service in time.
The air inlet pipe of electric brush was blocked or
the brush can’t work
The dust cup is full
Long running, high temperature
The dust cup filter is covered with dust
Paper or wool fibers clogged in metal mesh
holes
Low battery
Fault Causes
Soft velvet rolling brushes are used on
unsuitable surfaces
Rolling brush has too much entanglement,
such as hair fiber and other long impurities
Clean up the garbage that is attached to the electric
rolling brush
Empty the dust
Restart the machine for use after static cooling
Clean or replace the dust cup filter
Regularly check if the metal mesh is clogged
Charge the vacuum cleaner
Replace with the carbon fiber rolling brush and
change the use environment
Clean up the brush entanglement
Solutions
The power adapter is not properly plugged in
Remove and replace with a new one
Small roller is winded with hairs and other
foreign matters
Regularly check if the power adapter is plugged
in properly
Step 1: Rolling brush removal: Place the electric ground brush on the reverse side, push the roller brush release button, remove the roller brush fixing block; remove
the roller brush to clean the surface attachments;
Step 2: Brush cleaning: use a cleaning brush to pick up and cut off the hair and fibrous material attached to the roller brush to separate it from the roller brush
.
Product Cleaning
Step 1: Dust cup assembly disassembly: press the dust cup release button, pull the dust cup to the right in the horizontal direction, and separate
the dust cup assembly from the main body;
Step 2: Cyclone mechanism separation: Flip the dust cup, remove the cyclone mechanism according to the illustration, clean the dust, and if
necessary, remove the dust cup filter element for dust cleaning;
Step 3: Cyclone mechanism and dust cup filter installation: Align the position of the cyclone mechanism and the dust cup with the card position,
and install according to the diagram;
Step 4: Install the dust cup assembly: Insert the dust cup to prevent tripping, and insert it into the dust cup counterclockwise until you hear a click.
Step 1: Cyclone cleaning: Remove the cyclone mechanism inside the dust cup to clean the dust and hair attached to the metal mesh and the air
duct bracket;
Step 2: Clean the dust cup and metal mesh: Rinse the dust cup and metal mesh with water and use it after drying to prevent dust from
agglomerating when used again;
Step 3: Clean the dust cup filter: remove the dust cup filter, clean the suspended dust with a cleaning brush, wash it, and replace the specified
dust cup filter if necessary. It is recommended to replace the specified dust cup filter every 3 months to ensure the cleaning effect;
Step 4: After the filter element cleaning: remove the rear filter element, use the cleaning brush to clean the suspended dust in the up and down
direction, not washable, if necessary, you can replace the designated rear filter element, it is recommended to clean it every 6 months, and
replace it every year to ensure the cleaning effect.
Removal and Installation of the Dust Cup
Step 1: Disassemble the main tail cover: Open the main tail cover with the cleaning brush, align the tip of the cleaning brush with the opening
slot of the tail cover of the main unit, and press it slightly in the vertical direction. After lifting the tail cover of the main unit, remove the tail cover
of the main unit;
Step 2: Taking out the rear filter element: extracting the rear filter element by using the handle position of the rear filter element;
Step 3: Install the rear filter element: install the rear filter element to the rear end of the main filter cover and press the stop position to the stop
position;
Step 4: Install the main tail cover and place the main tail cover in the matching position with the main unit. Press it slightly until you hear a click.
Removal and Installation Instruction of the Rear Filter
Component Cleaning
Rolling Brush Replacement
*If the vacuum cleaner has a rear filter, please refer to the actual configuration.
*The vacuum cleaner is the factory assembly roller brush, please refer to the actual configuration.
Cordless Vacuum Cleaner Product Warranty Card
Cordless Vacuum Cleaner Product Maintenance Record
This warranty card contains personal information of consumers, please keep it properly.
X/EN-8
Manufacturer: ROIDMI Information Technology Co., Ltd.
Address：4F,C8 Building,No.1699 Huishan Road,Life Science and Technology Park,Huishan District,Wuxi,Jiangsu,PRC
Service Email： [e-mail]
Corporate website：www.roidmi.com/en
For product sales information, please check the website：www.roidmi.com/en/product-guide.html
Made in China
Version：V1.0 11.2019
User Name
Communication Address
Contact Information
Product Name and Model
Product Main Machine Serial No.
Purchase Date
Maintenance Center Maintenance DateAccessory ReplacementFault Description Maintenance Engineer
Privileges for Exclusive Services
无锡睿米信息技术有限公司
2019.10.14
薑海鈺
张志强
10套
修 改 人
修 改 点
历史版本
105g哑粉纸
143×225mm
必须符合欧盟相关规范及睿米质量管理要求，如ROHS 2.0
REACH 、PAHs、POPs、CP65、WEEE、美国、欧洲
国内的包装指令等要求
未注尺寸请参考图面尺寸或3D尺寸
V0.2
RM38无线吸尘器
检测标准
印刷+过哑油+模切+折页
过哑油
制作工序
色相正确、印迹牢固、套印准确、各色套印
不露杂色，套印误差≤ 0.1mm
模切走位≤±0.5mm
工艺要求
设 计 于
设计审核
Pantone Cool Gray 11c+CMYK
XCQ06RM无线吸尘器X20
V0.1
整合28美版警示内容+18FCC
姜海钰/20191014
Warning: in order to avoid causing harm to you and others and causing unnecessary property damage,
read carefully and observe the following "safety precautions" before use. The safety precautions are
divided into two parts: "Warning" and "Attention".Both "Warning" and "Attention" are important parts of
safe use. Be sure to follow them.
To reduce the risk of fire, electric shock, or injury
Notices that can lead to slight injury or product safety risk
1. Do not use outdoors or on wet surfaces；
2. Do not allow to be used as a toy. Close attention is necessary when used by or near children, pets or
plants；
3. Use only as described in this manual. Use only manufacturer’s recommended attachments；
4. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged,
left outdoors, or dropped into water, return it to a service center；
5. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges
or corners. Do not run appliance over cord. Keep cord away from heated surfaces；
6. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord；
7. Do not handle charger, including charger plug, and charger terminals with wet hands；
8. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair,
and anything that may reduce air flow；
9. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts；
10. Use extra care when cleaning on stairs；
11. Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they
may be present.
12. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes；
13. Do not use without dust cup and filters in place；
14. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery
pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing
appliance that have the switch on invites accidents；
15. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack；
16. Use appliances only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire；
17. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire；
18. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns；
19. Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion or risk of injury；
20. Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or
temperature above 130°C may cause explosion；
21. Follow all charging instructions and do not charge the battery pack or appliance outside of the
temperature range specified in the instructions. Charging improperly or at temperatures outside of the
specified range may damage the battery and increase the risk of fire；
22. Have servicing performed by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the product is maintained；
23. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the
instructions for use and care；
24. Always turn off this appliance before connecting or disconnecting motorized nozzle；
25. Do not use this product near wet places such as the bathroom；
26. Do not use on cleaning liquids, matches and damp rubbish；
27. Do not use broken power plug and loose socket；
28. Do not disassemble, repair or transform by yourself to avoid fire, injury or improper operation, except certified
replacement of consumables according to this manual；
29. Use AC power at rated voltage, do not use generator or DC power supply, etc., to avoid causing fire and
electric shock；
30. Regularly use dry cleaning cloth to clean the dust on the plug, so as to avoid fire due to poor insulation
and other reasons；
31. Make sure that the plug is well inserted in the bottom to avoid electric shock, short circuit and fire；
32. In case of any abnormal failure, stop using it immediately to avoid causing smoke, fire and electric shock；
33. When in following conditions: ① Switched to "on" and still not running; ② Frequent stops while in
operation; ③ Intermittent power supply, when moving plug or power cord; ④ Body distortion, unusual heating; ⑤
Smell of burning; ⑥ If there is any abnormal sound during operation, immediately cut off the power supply and
unplug the plug, and the manufacturer or its maintenance staff shall replace and repair it to avoid any danger；
34. Be sure to remove the plug from the power socket before cleaning and maintenance to avoid electric
shock and injury；
35. If the electric brush is found to be abnormal in use, turn off the power switch and immediately check
whether the electric brush is wrapped around the hair or other excessively long fibers, and clean it in time；
36. Do not pour water on the body of the machine and plug or immerse the body and/or plug into water；
37. Do not operate the vacuum facing the ears, eyes, mouth and other body parts；
38. This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved；
39. Keep the vacuum cleaner away from the hospital's electromagnetic equipment；
40. For indoor use only, do not expose to rain；
41. If the cord is damaged, it must be replaced by the manufacturer, our service agent or other qualified
persons, in order to avoid a hazard；
42. The charger must not be used if the enclosure is damaged because this will cause hazard of electric
shock；
43. The power adapter is only used for the indicated vacuum cleaner；
44. Before charging, check whether the voltage specified on the marking label corresponds to the mains voltage；
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING (THISAPPLIANCE). Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
BEFORE USING READ ALL INSTRUCTIONS
45. Keep the charger away from all sources of heat；
46. Do not immerse the appliance in water；
47. Do not continue to use the appliance in such cases: drop, impact by a heavy object, other means of
damage, etc. If it occurs, get the charger, repaired by our service agent；
48. Remove the plug from the socket before cleaning or maintaining the charger；
49. Do not try to charge non-rechargeable batteries with this charger；
50. When the vacuum cleaner is attached to the magnetic wall mount, do not let children or pets collide with it to
avoid damage；
51. Household use only；
52. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing；
53. Do not allow to be used as a toy,Close attention is necessary when used by or near children；
54. Use only as described in this manual. Use only manufacturer’s recommended attachments；
55. Turn off all controls before unplugging；
ATTENTION(Risk Of Injury)
1. Do not run for a long time when the vacuum cleaner is blocked；
2. Do not block the vent (to avoid deformation to the body of the machine, failure or fire caused by overheating)；
3. Do not drag and drop the body of the machine (to avoid scratching the ground)；
4. Do not wave the body of the machine. Do not let children play with the body, etc. (to avoid injury or damage
to the body)；
5. Do not drop the product into other objects and apply pressure to the product (to avoid fire and electric
shock caused by failure)；
6. Be sure to install the dust cup before using it (to avoid motor and body damage)；
7. Check whether the adapter charging cord is in good condition before charging ；
8. Before using the vacuum cleaner for the first time or replacing the specified filter element, turn off the
power of the vacuum cleaner and ensure that the filter element is installed in place；
9. When there is a lot of garbage in the dust cup, clean it at that time to ensure unimpeded ventilation path,
so as to avoid blocking, resulting in reduced suction or heating of the motor；
10. The waste battery pack should be recycled safely. Do not throw it away just anywhere；
11. Do not draw large, soft, sticky objects such as wool, hair, bulk cotton, dough, and chewing gum into the
vacuum cleaner；
12. Be sure that the vacuum cleaner power is turned off when the electric brush and accessories are
reconnected or disconnected；
13. Do not use and store the vacuum cleaner under extreme adverse conditions, such as extreme,temperature,
etc. It is recommended to use , charge and store in the indoors at 4 to 35 ℃ environment temperature,
please store in a cool and dry place.
14. Brush May Start Unexpectedly,Disconnect Battery Pack Before Cleaning or Servicing.Always turn
off this appliance before connecting or disconnecting motorized nozzle；
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on.
the user is encouraged to try to correct the interference by one or more of the following measures:
FCC ID:2AR98-XCQ06RM
The equipment is a handheld device.