ROIDMI Cordless Vacuum Cleaner Operation Manual Read manual before use.
Contents Safety Precautions Warning 3 Attention 3 Warning 4 Attention(Risk Of Injury) 5 Product Description Main Machine 6 Accessories 7 Product Installation Installation 7 Storage (With/Without Nails) 8 Product Usage Power On/Off and Suction Power Switch 8 Power Adapter Usage 9 Status Indicator LEDs 9 Adapter Basic Parameters 9 Rolling Brush Usage 10 Accessories Usage 10 Quick Setting 11 About Works With Mijia 11 Product Cleaning Removal and Installation of the Dust Cup 11
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING READ ALL INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Warning: in order to avoid causing harm to you and others and causing unnecessary property damage, read carefully and observe the following "safety precautions" before use. The safety precautions are divided into two parts: "Warning" and "Attention".Both "Warning" and "Attention" are important parts of safe use. Be sure to follow them.
Warning 25. Remove the plug from the socket before cleaning or maintaining the charger； 26. Do not try to charge non-rechargeable batteries with this charger； 27. When the vacuum cleaner is attached to the magnetic wall mount, do not let children or pets collide with it to avoid damage； 28. Household use only； 29. To reduce the risk of fire, electric shock, or injury； 30. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing； 31.
Warning 51. Have servicing performed by a qualified repair person using only identical replacement parts.This will ensure that the safety of the product is maintained； 52. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care. Attention(Risk Of Injury) 1. Do not run for a long time when the vacuum cleaner is blocked； 2. Do not block the vent (to avoid deformation to the body of the machine, failure or fire caused by overheating)； 3.
Product Description Main Machine Shift Switch Charge Jack Power Switch Dust Cup Anti-off Buckle Power Indicator LED Status Indicator LED Dust Cup Dust Cup Release Button Release Button Metal Connecting Rod Release Key Roller Light Sensor Release Button Rolling Brush Release Button Floodlight Rolling Brush 6
Accessories Long Flat Suction Multi-function Brush (Assembly with Long Flat Suction) Mattres Brush Sofa Brush Extension Hose Power Adapter Cleaning Brush Magnetic Wall Mount Expansion Hose×2 Carbon Fiber Rolling Brush Screw ×2 Installation Main Machine Installation 1. Insert the electric brush into the socket of the metal connecting rod vertically, until it clicks into position. 2. Insert the metal connecting rod into the socket of the host vertically, until it clicks into position. Attention 1.
Storage Installation without Nails: Fix the magnetic wall mount with washable glue. Recommended for use on glass and ceramic walls；keep the wall clean before installing, no dirt, impurities, etc. 1. Paste transparent sticker to the wall, 88cm above the ground, as in figure 1； 2. Remove the protective film of the magnet wall mount and paste it to the position of the transparent sticker on the wall; 3. Place the electric brush horizontally on the ground, as in figure 2； 4.
Power Adapter Usage 1. Fix the charging cable Before charging, make sure that the adapter is connected to the rated ac power supply. The charging cable is stuck into any power line slot on both sides of the magnetic wall mount to help fix the charging cable. 2.
Usage of Rolling Brush 2. Soft velvet rolling brush can be used for floor tile, wooden floor, etc. and polished. It is recommended not to use soft velvet rolling brush to clean the carpet. 1. Carbon fiber rolling brush can be used for floor tile, floor and short wool carpet. Soft Velvet Rolling Brush Carbon Fiber Rolling Brush Attention 1. Do not suck up water with the vacuum cleaner； 2. Do not use a water-stained roller brush for assembly； 3.
Quick Settings 1. Users can control the performance of the product through “ROIDMI” APP which can be downloaded in APP store. This APP supports both Android and IOS. Every Roidmi product can be connected through it and is synergistic with all other ROIDMI products. You can also visit www.roidmi.com/en to download the APP. 2. Connection Connection On the home page of “ROIDMI”, click “my device”, then connect to ROIDMI Cordless Vacuum Cleaner.
Dust Cup Cleaning 1. Cyclone mechanism cleaning: Take out the cyclone mechanism in the dust cup, clean the dust and hair attached to the metal net. 2. Dust cup and metal mesh cleaning: wash the dust cup and metal mesh with clean water and use it after drying to prevent the dust from clumping when used again. 3. Filter cleanliness: take out the filter, clean suspended dust with a brush and wash it. If necessary, replace the specified filter.
Product Troubleshooting When the vacuum cleaner can't operate normally, troubleshoot or contact the customer service in time.
Product Hazardous Substances Declaration Hazardous Substances Part Name Pb Hg Cd Cr(VI) PBB PBDE Plastic Case Circuit Board Cable Battery Power Adapter Magnet This form is prepared in compliance with SJ/T 11364. ：Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T 26572.
Cordless Vacuum Cleaner Product Performance Fault List Name Performance Fault The machine cannot be started under normal use Rolling brush does not rotate under normal operation condition Cordless Vacuum Cleaner The indicator light remains the same under normal use The APP cannot be connected under normal use Manufacturer: ROIDMI Information Technology Co., Ltd. Address：4F,C8 Buliding,No.
ROIDMI Cordless Vacuum Cleaner Maintenance Record First maintenance record Second maintenance record Name of maintenance agent Name of maintenance agent Maintenance time Maintenance time Fault condition Fault condition Fault cause Fault cause Fault handling situation Fault handling situation Certificate of return or exchange Certificate of return or exchange Submission date Submission date Original sequence number Original sequence number New sequence number New sequence number Maintenan
