Operation Manual

Step 3: Install the water tank
Push the electric water tank and dust box horizontally in the direction of the groove on the main
unit until you hear a "click" sound.
Step 4: Install the mopping module
Push the mopping module buckle in parallel along the electric water tank until you hear a "click"
sound.
Caution
1. Do not use the mopping function on the carpet.
2. When charging or when the robot is not in use, remove the mopping module, pour out the excess water in the water tank and clean the mop to avoid mold or odor.
3. It is recommended to clean the mop each time to maintain water speed and cleaning effect. Replace with a new mop if necessary.
4. When charging the main unit on wooden floors, remove the mopping module in a timely manner to prevent water seeping from the mop and damaging the floor.
Use
Downloading app
This product is compatible with the Roidmi vacuum cleaner platform, and can be controlled using
the “roidmi cleaner” app. It supports Android and iOS systems.
1. Scan the QR code below, or search for “roidmi cleaner” in the app store to download and install
the app.
2. Sign in to the app. Long press
and buttons on the robot cleaner at the same time for
longer than 3 seconds to reset it. Click “+” at the upper right on the app’s homepage to add
device. Select the robot cleaner from the device list and connect it to WiFi according to the
prompts.
Reset WiFi Add device
Configure network
Long press
and
to reset
3. If you have any question, please contact our service personnel or visit our official website.
* This product only supports 2.4G WiFi
Mi Home app
This product works with mijia (Mi Home). It can be controlled via Mi Home app and interconnected
with other smart devices.
1. Scan the QR code below, or search for “Mi Home” in the app store to download and install the app.
2. Turn on Mi Home app, register an account or sign in to the app.
3. Long press
and buttons on the robot cleaner at the same time for longer than 3 seconds to
reset it. Click “+” at the upper right on the app’s homepage to add device.
4. In the device category list find the “Robot Cleaner” category, then click your ROIDMI robot cleaner
model to enter Network Configuration interface.
5. Perform follow-up operations according to the app’s prompts on network configuration.
MIHome
Reset WiFi
Configure network
Add device
Long press
and
to reset
Reminder: Actual operations may vary due to upgrade and update of Mi Home app. Please follow the
instructions in the app.
Please note that “works with mijia” only certifies the product is compatible with Mi Home app.
Xiaomi and Mijia are not liable for any problems related to the product itself and its manufacturer’s
production, executive standards, quality control, etc.
EN
9