Owner manual

Section 5 Installation
4. Ensure the power entry switch is “OFF”.
5. Firmlyinsertthepowercordintotheoutletonthecontrolunit(fig.6).
6. Insert the other end of the power cord into an equivalent grounded power
receptacle.
7. Pressthepowerentryswitch“ON”andrefertoManualSetup(Section6).
Note: Check to make sure all hose connections are secure before turning on.
Manual Setup
1. Press the “On/Off” button on the keypad to the “On” position and allow the mattress
to FULLY inflate before making any adjustments or placing the patient on the
mattress.
On
Off
Figure 5
Section 7 Manual Setup
SelectAir,
SelectAir Max,
HybridSelect
Models
Figure 8
ON/OFF
BariSelect
Models only
Figure 6
Figure 7
Power Entry
Switch
Fuse
Compartment
Power Entry
Receptacle
15feet(4.6meters)
11