Specifications

PRODUCTS
Hybrid IC
TYPE
BP35C5
PAGE
30/33
24. Precautions as Radio Equipment
24.1. For Japan region (ARIB STD-T108)
BP35C5 has acquired the “Construction design certification” (Article 38-24 (1) of the Radio Act) for “Radio
Equipment: Specified low power equipment of less than 13 GHz prescribed in Article 2-1 (8) Type of Specified
Radio Equipment.”
Consequently, BP35C5 is available for use as radio equipment only in Japan without making an application for
radio station license.
- Construction Design Certification Number: 005-102391
To safely use BP35C5 as radio equipment, be sure to observe the following.
1) The marking of this Product indicates that it has acquired the “Technical Regulations Conformity
Certification.”
Do not erase the marking or affix any label on the marking.
2) Never disassembly or modify this Product. Doing so may be subject to punishment under the Radio Act.
3) To use the dedicated external antenna, contact your ROHM representative in advance.
24.2. For United States region (FCC Part 15)
BP35C5 module has received Federal Communications Commission (FCC) CFR47 Telecommunications, Part 15
Subpart C “Intentional Radiators” modular approval in accordance with Part 15.212 Modular Transmitter approval.
Modular approval allows the end user to integrate the BP35C5 module into a finished product without obtaining
subsequent and separate FCC approvals for intentional radiation, provided no changes or modifications are made to
the module circuitry. Changes or modifications could void the user's authority to operate the equipment. The end
user must comply with all of the instructions provided by the Grantee, which indicate installation and/or operating
conditions necessary for compliance.
The finished product is required to comply with all applicable FCC equipment authorizations regulations,
requirements and equipment functions not associated with the transmitter module portion. For example, compliance
must be demonstrated to regulations for other transmitter components within the host product; to requirements for
unintentional radiators (Part 15 Subpart B “Unintentional Radiators”), such as digital devices, computer
peripherals, radio receivers, etc.; and to additional authorization requirements for the non-transmitter functions on
the transmitter module (i.e., Verification, or Declaration of Conformity) (e.g., transmitter modules may also contain
digital logic functions) as appropriate.
REV. E
SPECIFICATION No.: TARGET SPECIFICATION
TSZ22111･05･002