Datasheet

BD7561G,BD7561SG,BD7541G,BD7541SG,
BD7562F/FVM,BD7562SF/FVM, BD7542F/FVM,BD7542SF/FVM
Technical Note
2/20
www.rohm.com
2009.05 - Rev.A
© 2009 ROHM Co., Ltd. All rights reserved.
Absolute Maximum Ratings (Ta=25[])
Parameter Symbol
Rating
Unit
BD7561GBD7562 F/FVM
BD7541GBD7542 F/FVM
BD7561SGBD7562S F/FVM
BD7541SGBD7542S F/FVM
Supply Voltage VDD-VSS 15.5 V
Differential Input Voltage
(*1)
Vid VDD-VSS V
Input Common-mode Voltage Range Vicm (VSS-0.3)(VDD0.3) V
Operating Temperature Topr -40~+85 -40~+105
Storage Temperature Tstg -55~+125
Maximum Junction Temperature Tjmax 125
Note: Absolute maximum rating item indicates the condition which must not be exceeded.
Application of voltage in excess of absolute maximum rating or use out absoluted maximum rated temperature environment may cause deterioration of characteristics.
(*1) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more then VSS.
Electric Characteristics
BD7561
family (Unless otherwise specified VDD=+12[V], VSS=0[V], Ta=25[])
Parameter Symbol
Temperature
range
Guaranteed limit
Unit Condition
BD7561G,BD7561SG
Min. Typ. Max.
Input Offset Voltage
(*2)(*4)
Vio
25 - 1 9
mV VDD=514.5[V],VOUT=VDD/2
Full range - - 10
Input Offset Current
(*2)
Iio 25 - 1 - pA -
Input Bias Current
(*2)
Ib 25 - 1 - pA -
Supply Current
(*4)
IDD
25 - 370 550
μA
RL= All Op-Amps
AV=0[dB],VDD=5[V],VIN=2.5[V]
RL= All Op-Amps
AV=0[dB],VDD=12[V],VIN=6.0[V]
Full range - - 600
25 - 440 650
Full range - - 700
High Level Output Voltage VOH 25 VDD-0.1 - - V RL=10[k]
Low Level Output Voltage
VOL 25 - - VSS+0.1 V RL=10[k]
Large Single Voltage Gain AV 25 70 95 - dB RL=10[k]
Input Common-mode Voltage Range Vicm 25 0 - 12 V VDD-VSS=12[V]
Common-mode Rejection Ratio CMRR 25 45 60 - dB -
Power Supply Rejection Ratio PSRR 25 60 80 - dB -
Output Source Current
(*3)
IOH 25 3 8 - mA VDD-0.4[V]
Output Sink Current
(*3)
IOL 25 4 14 - mA VSS+0.4[V]
Slew Rate SR 25 - 0.9 - V/μs CL=25[pF]
Gain Bandwidth Product FT 25 - 1.0 - MHz CL=25[pF], AV=40[dB]
Phase Margin θ 25 - 50° - - CL=25[pF], AV=40[dB]
Total Harmonic Distortion THD 25 - 0.05 - % VOUT=1[Vp-p],f=1[kHz]
(*2) Absolute value
(*3) Under the high temperature environment, consider the power dissipation of IC when selecting the output current.
When the terminal short circuits are continuously output, the output current is reduced to climb to the temperature inside IC.
(*4) Full rangeBD7561Ta =-4 0[ ]+85[] BD7561STa=-40[]+105[]