Specification Sheet

ManualsBrandsRohl ManualsPlumbingWellsford 8" Tub Spout

www.ferguson.com

Traditional Wellsford™

WELLSFORD™ 8” WALL MOUNT TUB SPOUT

WE2317

FEATURES

• 8” reach wall mount tub spout

• 3/4” NPT female inlet

• Brass construction

• If 1/2” required, you may purchase a

3/4” x 1/2” nipple at any hardware store

COLORS/FINISHES

• Polished Chrome

• Polished Nickel

• Satin Nickel

WARRANTY

• Limited Lifetime

Consult your local FERGUSON showroom for additional information and speciﬁcations. www.ferguson.com.

2 9/16"

8 9/16"

"4/3 1

3/4" NPT

Summary of content (4 pages)

PAGE 1
www.ferguson.com WELLSFORD™ 8” WALL MOUNT TUB SPOUT Traditional Wellsford™ WE2317 FEATURES COLORS/FINISHES WARRANTY • 8” reach wall mount tub spout • 3/4” NPT female inlet • Brass construction • If 1/2” required, you may purchase a 3/4” x 1/2” nipple at any hardware store • Polished Chrome • Polished Nickel • Satin Nickel • Limited Lifetime 8 9/16" 1 3/4" 2 9/16" 3/4" NPT 8" Consult your local FERGUSON showroom for additional information and specifications. www.ferguson.com.
PAGE 2
www.ferguson.com SPARE PARTS 3/4 in Female Installation Instructions 1. 2. 3. 4. 5. Remove mounting nut #2. a. loosen off grub screw #5 until nearly out to ensure the grub screw does not cut the o-rings on the mounting nut. Apply grease to o-rings on mounting nut. (Not supplied.) Install mounting nut #2 to supply line and ensure the o-ring seal #1 is in place. Install the spout #4 and ensure the o-ring seal #3 is in place. Position spout and tighten the grub screw #5.
PAGE 3
www.ferguson.com INSTALLATION INSTRUCTIONS MOUNTED 317STN WE2317APC, WE2317PN, WE2317STN ONS INSTALLATION INSTRUCTIONS once installed. e, CA 92688 ome.com ROHL WELLSFORD WALL MOUNTED TUB SPOUT Please leave instructions with the home owner once installed. #41924 01/14 ROHL LLC 3 Parker, Irvine, CA 92688 714-557-1933 www.rohlhome.com #41924 01/14 Consult your local FERGUSON showroom for additional information and specifications. www.ferguson.com.
PAGE 4
www.ferguson.com INSTALLATION INSTRUCTIONS 3/4 in Female Installation Instructions 1. he grub screw does 1 is in place. 2. 3. 4. 5. Remove mounting nut #2. a. loosen off grub screw #5 until nearly out to ensure the grub screw does not cut the o-rings on the mounting nut. Apply grease to o-rings on mounting nut. (Not supplied.) Install mounting nut #2 to supply line and ensure the o-ring seal #1 is in place. Install the spout #4 and ensure the o-ring seal #3 is in place.