Specification Sheet

ManualsBrandsRohl ManualsPlumbingUltra Thin Rain Showerhead, in Matte Black

www.rohlhome.com

Spa Shower

9 3/8” SQUARE ULTRA THIN RAIN SHOWERHEAD

SLM05

FEATURES

• Single-function Rain showerhead

• 9 3/8” square faceplate

• Type 304 Stainless Steel construction

• Flexible calcium resistant nozzles on spray face

allow for easy removal of hard water build-up

• Unique 1/8” ultra thin design

• 1/2” female inlet with swivel connection

• Flow rate 2.0 GPM

• For installation on ceiling or on exposed shower arm

• False ceiling installation kit available, order

KIT00006NPT

• Meets EPA WaterSense® criteria to conserve water

 withoutsacricingperformance

COLORS/FINISHES

• Polished Chrome

• Polished Nickel

• Satin Nickel

9 5/16”

G1/2”F

1/8”

1 5/8”

Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.

WARRANTY

• 2-year Limited Warranty

Summary of content (9 pages)

PAGE 1
www.rohlhome.com 9 3/8” SQUARE ULTRA THIN RAIN SHOWERHEAD Spa Shower SLM05 FEATURES COLORS/FINISHES WARRANTY • • • • • Polished Chrome • Polished Nickel • Satin Nickel • 2-year Limited Warranty Single-function Rain showerhead 9 3/8” square faceplate Type 304 Stainless Steel construction Flexible calcium resistant nozzles on spray face allow for easy removal of hard water build-up • Unique 1/8” ultra thin design • 1/2” female inlet with swivel connection • Flow rate 2.
PAGE 2
www.rohlhome.com INSTALLATION INSTRUCTIONS INSTALLATION KIT MySlim SHOWER HEADS FOR FALSE CEILING Art. KIT00006NPT Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
PAGE 3
www.rohlhome.com INSTALLATION INSTRUCTIONS WARNINGS:      The plant must be made by an authorised staff and must be certified at the norms in use in the country where the installation is made. All the material used must be conformed to the safety requirements forecast for this type of installation, as per the norms which are effective in the country where the installation is made. All (hydraulic and electric) connections must be perfectly isolated one from the other and stably fixed.
PAGE 4
www.rohlhome.com INSTALLATION INSTRUCTIONS mm ROOF Ø220mm Ø10mm Ø32mm 3 Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
PAGE 5
www.rohlhome.com INSTALLATION INSTRUCTIONS MIN 135mm MAX 160mm PRE-INSTALLATION Ø150mm Run a pipe to the ceiling with G1/2”M outlet for the showerhead and prepare a false ceiling that must be at a distance between 135 mm and 160 mm. Prepare a Ø150 mm hole in the false ceiling near the pipe outlet. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
PAGE 6
www.rohlhome.com INSTALLATION INSTRUCTIONS INSTALLATION Then, screw hermetically the threaded connection using a 24 mm wrench together with hemp or similar materials. 5 Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
PAGE 7
www.rohlhome.com INSTALLATION INSTRUCTIONS Put the felt covers (1) and the protection gasket (2) supplied on the upper shower head surface. Then, screw the kit to the shower head using a 24 mm wrench and a 22 mm wrench. The gasket (2) does not penetrate dust and/or air inside the cavity between the ceiling and the false ceiling as well as makes soundproof the area. The felt covers (1) protect the false ceiling from any possible scratches during the screwing process.
PAGE 8
www.rohlhome.com INSTALLATION INSTRUCTIONS Screw by hand the shower head as shown in the picture below. When the installation is completed, make sure that the shower head is perfectly stick to the false ceiling. This installation is the ideal solution for shower heads of huge dimensions and for any shower head with G 1/2 swivel. 7 Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
PAGE 9
www.rohlhome.com INSTALLATION INSTRUCTIONS Kit for adhering to the false ceiling installation of MySlim shower head. PATENTED a) Run a pipe to the ceiling with G 1/2"M outlet for the showerhead and prepare a false ceiling tliat must be at a aistance between 135 mm e 160 mm. b) Prepare a 0 150 mm hole in the false ceiling near the pipe outlet. Then, screw hermetically the threaded connection using a 24 mm wrench together with hemp or similar materials.