Specification Sheet

ManualsBrandsRohl ManualsKitchen SinksRohl 36-3/4" Undermount Dual Basin Kitchen Sink with Sound Dampening

RSS3518

FEATURES

Colors WARRANTY

www.rohlhome.com

• 35 1/4" x 18" x 10" deep (internal

dimensions)

• 2 bowls are 17" x 18"

• Fully insulated using “quiet coat” sound

deadening technology

• Commercial grade, 16 gauge 18/10 type

304 Stainless Steel

• Zero-edge side walls with "Tangent Edge"

easy to clean bottom edge radius

• ISO 9001 certified

• ROHL brand logos

• Standard 3 1⁄2" drain opening

• Brackets included

• Stainless Copper finish not available

• Brushed Stainless offers a brilliant shine

• 36 3⁄4" x 19 1⁄2" x 10" deep (external

dimensions)

• Brushed Stainless Steel (SB)

Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.

• Limited Lifetime on manufacturer

defects

ROHL 2 BOWL STAINLESS STEEL KITCHEN SINK

ROHL Kitchen Sinks

10"

3/4"

4 5/16"

19 1/2"

18"

3/4"

17"

36 3/4"

3/4"

3 1/2"

1 1/4"

17"

Summary of content (5 pages)

PAGE 1
www.rohlhome.
PAGE 2
Frequently Asked Questions - Stainless Steel Copper Sinks How is the Stainless Copper color obtained? The copper color is achieved by fusing a very thin layer of specialty metal to the surface. The type of metal and the thickness offers the desired hue. How does the Stainless Copper differ from regular stainless steel? The Stainless Steel Copper is AISI304 grade stainless steel which has been submitted to a superficial coating.
PAGE 3
Does Stainless Steel Copper scratch? Stainless Steel Copper is obtained through a secondary treatment of the stainless steel. If the surface is submitted to rough use it might scratch, just like any other stainless sink. Please avoid the use of rough bottom pots and pans, sharp cutlery, and other hard edge materials. A sink grid with matching finish is recommended to prevent scratching that may occur from daily use.
PAGE 4
Frequently Asked Questions - Rohl Stainless Steel Sinks How are the Rohl stainless steel sinks manufactured? The Rohl stainless steel sinks are completely hand-crafted in Italy by a family owned company specializing in appliances which has expanded their range to include the water appliance. Using AISI304 stainless steel, the sinks are laser-cut to the precise measurements of the design.
PAGE 5
Take care to avoid strikes, dropping heavy objects into the sink, and not using utensils which can scratch the surface. Also, avoid contact with chemicals, metal products and metal brushes. Do not leave tomato residue, milk or coffee on the sink for an extended period of time. Avoid metal cans with wet bottoms, and iron objects in general, including cleaning sponges with iron wool.