Specification Sheet

ManualsBrandsRohl ManualsKitchen & Bath FixturesRohl R7521SS Pull-Down FAUCETS, 3.50 x 23.50 x 7.75 inches Stainless Steel

www.rohlhome.com

COLORS/FINISHES

• Stainless Steel

WARRANTY

• Limited Lifetime

Consult your local ROHL showroom for additional information and speciﬁcations. For complete warranty details and a list of showrooms, go to www.rohlhome.com.

FEATURES

• Metal lever

• Dual spray modes

• Handspray locks into spray mode

• Stainless steel construction

• 1 5/8” max. installation depth on deck

• Ceramic disc control cartridge

• 9 5/8” reach C-spout

• Spout is ﬁxed, metal hose, metal handspray and

spring swivel

• 1.8 GPM

• Requires 2 1/2” clearance from backsplash to

center of faucet hole

MODERN SIDE LEVER STAINLESS STEEL PRO PULL-DOWN KITCHEN

FAUCET

R7521SS

1 3/8"

1 7/8" Max.

Bench thickness

23 5/8" Max.

4 5/16"

8 5/64"

21 15/16"

8 27/32"

G1/2" Female

4 1/2"

2 9/32"

2 1/8"

1 3/16"

1 25/32"

Mounting Hole

Summary of content (5 pages)

PAGE 1
www.rohlhome.com MODERN SIDE LEVER STAINLESS STEEL PRO PULL-DOWN KITCHEN FAUCET R7521SS FEATURES COLORS/FINISHES WARRANTY • • • • • • • • • Stainless Steel • Limited Lifetime 1 7/8" Max. Bench thickness G1/2" Female 2 9/32" 4 1/2" 1 25/32" 23 5/8" Max. 8 27/32" 1 3/16" 8 5/64" 4 5/16" 21 15/16" Metal lever Dual spray modes Handspray locks into spray mode Stainless steel construction 1 5/8” max.
PAGE 2
www.rohlhome.com INSTALLATION INSTRUCTIONS then dry with a ROHL MODERN SIDE LEVER STAINLESS STEEL PRO PULL-DOWN KITCHEN FAUCET INSTALLATION INSTRUCTIONS R7521SS scouring agent rface of the faucet. Fantastik. t be covered by 8 1 7/8" Max. Bench thickness G1/2" Female 2 9/32" 1 25/32" 4 1/2" 8 27/32" 1 3/16" 8 5/64" 4 5/16" 21 15/16" ww.rohlhome.com). m entering the street 23 5/8" Max. h and warm 2 1/8" 1 3/8" Mounting Hole Please leave this form with the product once installed.
PAGE 3
www.rohlhome.com INSTALLATION INSTRUCTIONS Installatio Note: This mixer spout arc. 1. Flush pipe 2. Cut a mou is 30 inche Check the able to rea 3. Remove m from the th lower mixe 4. From belo tighten jac 5. Install the a. Apply b. Hand c. Red ta 6. Install the supply line a. Turn low flo b. Do no c. The fle 7.
PAGE 4
www.rohlhome.com INSTALLATION INSTRUCTIONS Installation Instructions Note: This mixer fits a maximum bench thickness of 2 1/4"inches and has a 140° spout arc. 1. Flush pipe work to ensure it is free from debris. 2. Cut a mounting hole 1 3/8” diameter in the desired position for the mixer ensuring there is 30 inches of clear vertical space below the hole for free movement of the hose. Check there is 5/8” of flat surface around the edge of the hole, and that the handset is able to reach where required.
PAGE 5
www.rohlhome.com INSTALLATION INSTRUCTIONS Care and Maintenance: After use, wipe down with a soft, dry cloth. For all chrome plated surfaces clean this product with warm soapy water and then dry with a dry soft cloth. Nickel plated, satin and Inca brass finishes should be cleaned with a soft cloth and warm water. Then dry with a dry soft cloth.