Specification Sheet

ManualsBrandsRohl ManualsHome EssentialsLux Matte Black Stainless Steel C-Spout Pro Pull-Down Faucet

FEATURES

• Metal side handle

• Dual-spray functionality with ability to toggle

between stream and spray settings

• Handspray locks into spray mode

• Stainless steel construction

• 1 5/8” max. installation depth on deck

• Ceramic disc control cartridge

• 9 5/8” reach C-spout

• Braided nylon hose

• 1.8 GPM

• Requires 2 1/2” clearance from backsplash to

center of faucet hole

LUX™ SIDE HANDLE PRO PULL-DOWN KITCHEN FAUCET

R7521

21 1/4” ±1/2”

1 7/8”

houseofrohl.com

Consult your local House of Rohl showroom for additional information and specications. For complete warranty details and a list of showrooms, go to houseofrohl.com

COLORS/FINISHES WARRANTY

• Limited Lifetime

(*) 5-Year Limited Warranty

• Polished Chrome

• Polished Nickel

• Satin Nickel

• Matte Black*

• Stainless Steel

Summary of content (5 pages)

PAGE 1
houseofrohl.com LUX™ SIDE HANDLE PRO PULL-DOWN KITCHEN FAUCET R7521 FEATURES COLORS/FINISHES • • • • • Polished Chrome Polished Nickel Satin Nickel Matte Black* Stainless Steel • Limited Lifetime (*) 5-Year Limited Warranty 1 7/8” 21 1/4” ±1/2” • Metal side handle • Dual-spray functionality with ability to toggle between stream and spray settings • Handspray locks into spray mode • Stainless steel construction • 1 5/8” max.
PAGE 2
d then dry with a h and warm scouring agent rface of the faucet. Fantastik. t be covered by houseofrohl.com ROHL MODERN ARCHITECTURAL SIDE LEVER INSTALLATION INSTRUCTIONS STAINLESS STEEL PRO PULL-DOWN KITCHEN FAUCET INSTALLATION INSTRUCTIONS R7521SS m entering the e street 18 Please leave this form with the product once installed. SYSTEM REQUIREMENTS To ensure the optimum performance and customer satisfaction please adhere to the following:  Flush out all pipe work prior to installation.
PAGE 3
houseofrohl.com INSTALLATION INSTRUCTIONS Installation I Note: This mixer fits a spout arc. 1. Flush pipe work 2. Cut a mounting h is 30 inches of c Check there is 5 able to reach wh 3. Remove mixer fr from the threade lower mixer throu 4. From below the tighten jack scre 5. Install the flexi h a. Apply greas b. Hand tighten c. Red tape on 6. Install the adapto supply lines. a. Turn the nut low flow. b. Do not over c. The flexi hos 7.
PAGE 4
houseofrohl.com INSTALLATION INSTRUCTIONS Installation Instructions Note: This mixer fits a maximum bench thickness of 1 5/8" inches and has a 140° spout arc. 1. Flush pipe work to ensure it is free from debris. 2. Cut a mounting hole 1 3/8” diameter in the desired position for the mixer ensuring there is 30 inches of clear vertical space below the hole for free movement of the hose. Check there is 5/8” of flat surface around the edge of the hole, and that the handset is able to reach where required.
PAGE 5
houseofrohl.com INSTALLATION INSTRUCTIONS Care and Maintenance: After use, wipe down with a soft, dry cloth. For all chrome plated surfaces clean this product with warm soapy water and then dry with a dry soft cloth. Nickel plated, satin and Inca brass finishes should be cleaned with a soft cloth and warm water. Then dry with a dry soft cloth.