Specification Sheet

ManualsBrandsRohl ManualsKitchenModern Lux Single-Handle Pull-Down Sprayer Kitchen Faucet in Stainless Steel

FEATURES

• Metal side handle

• Dual-spray functionality with ability to toggle

between stream and spray settings

• Handspray locks into spray mode

• Stainless steel construction

• 1 5/8” max. installation depth on deck

• Ceramic disc control cartridge

• 9 1/16” reach C-spout, retractable pull-down metal

handspray

• Nylon hose

• 1.8 GPM

• Matching kitchen faucet for R7663

• Requires 1 1/2” clearance from backsplash to

center of faucet hole

• Authentically crafted in New Zealand

LUX™ SIDE HANDLE PULL-DOWN KITCHEN FAUCET

R7520

8 1/2”

Consult your local House of Rohl showroom for additional information and specications. For complete warranty details and a list of showrooms, go to houseofrohl.com

COLORS/FINISHES WARRANTY

• Limited Lifetime

(*) 5-Year Limited Warranty

• Polished Chrome

• Polished Nickel

• Satin Nickel

• Matte Black*

• Stainless Steel

Summary of content (5 pages)

PAGE 1
LUX™ SIDE HANDLE PULL-DOWN KITCHEN FAUCET R7520 COLORS/FINISHES FEATURES • • • • • Polished Chrome Polished Nickel Satin Nickel Matte Black* Stainless Steel • Limited Lifetime (*) 5-Year Limited Warranty 8 1/2” • Metal side handle • Dual-spray functionality with ability to toggle between stream and spray settings • Handspray locks into spray mode • Stainless steel construction • 1 5/8” max.
PAGE 2
d then dry with a INSTALLATION INSTRUCTIONS LUX™ SIDE LEVER PULL-DOWN KITCHEN FAUCET INSTALLATION INSTRUCTIONS R7520 th and warm scouring agent urface of the faucet. Fantastik. ot be covered by 8 8 1/2” ww.rohlhome.com). m entering the e street Please leave this form with the product once installed. SYSTEM REQUIREMENTS To ensure the optimum performance and customer satisfaction please adhere to the following:  Flush out all pipe work prior to installation.
PAGE 3
INSTALLATION INSTRUCTIONS Installation Non-return valve and restrictor in handset Note: This mixer fits arc. 1. Flush pipe wo 2. Cut a mountin is 30 inches o Check there is able to reach 3. Remove mixe from the threa lower mixer th 4. From below th hose and onto 5. Install the flex a. Apply gre b. Hand tigh c. Red tape 6. Install the ada supply lines. a. Turn the low flow. b. Do not o c. The flexi h d. Ensure th 7. Install the hos hose itself. En is tight to outle 8.
PAGE 4
INSTALLATION INSTRUCTIONS Installation Instructions Note: This mixer fits a maximum bench thickness of 1 5/8” inches and has a 140° spout arc. 1. Flush pipe work to ensure it is free from debris. 2. Cut a mounting hole 1 3/8” diameter in the desired position for the mixer ensuring there is 30 inches of clear vertical space below the hole for free movement of the hose. Check there is 5/8” of flat surface around the edge of the hole, and that the handset is able to reach where required. 3.
PAGE 5
INSTALLATION INSTRUCTIONS Care and Maintenance: After use, wipe down with a soft, dry cloth. For all chrome plated surfaces clean this product with warm soapy water and then dry with a dry soft cloth. Nickel plated, satin and Inca brass finishes should be cleaned with a soft cloth and warm water. Then dry with a dry soft cloth.