Specification Sheet

ManualsBrandsRohl ManualsBar FaucetsModern Kitchen Single-Handle Bar Faucet with Pull Down Spray in Stainless Steel

www.rohlhome.com

ROHL — Kitchen Pull-Out/Pull-Down

Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.

MODERN ARCHITECTURAL SIDE LEVER BAR/FOOD PREP STAINLESS STEEL

PULL-DOWN KITCHEN FAUCET

R7519SS

FEATURES

• Stainless Steel construction

• Metal lever

• Dual spray modes

• 1 5/8” max installation depth on deck

• 1/4-turn ceramic disc control cartridges

• 7” reach C-spout

• Retractable pull-down metal handspray with lock

in spray mode

• Nylon hose

• Matching bar/food prep faucet for R7520SS

and R7521SS

• Requires 2 ½” clearance from backsplash to

center of faucet hole

• Authentically crafted in New Zealand

COLOR/FINISH

• Stainless Steel

WARRANTY

• Limited Lifetime

Summary of content (4 pages)

PAGE 1
www.rohlhome.
PAGE 2
www.rohlhome.com SPARE PARTS cloth. py water and then dry with a th a soft cloth and warm ROHL MODERN ARCHITECTURAL SIDE LEVER STAINLESS STEEL PULL-DOWN BAR FAUCET INSTALLATION INSTRUCTIONS R7519SS sive acid or scouring agent mage the surface of the faucet. dex, 409 or Fantastik. rface will not be covered by for details. y debris from entering the work on the street Please leave this form with the product once installed. SYSTEM REQUIREMENTS , Irvine, CA 92618 w.rohlhome.
PAGE 3
www.rohlhome.com SPARE PARTS Installation Instructions Non-return valve and restrictor in handset Note: This mixer fits a maximum bench thickness of 1 5/8” inches and has a 140° spout arc. 1. Flush pipe work to ensure it is free from debris. 2. Cut a mounting hole 1 3/8” diameter in the desired position for the mixer ensuring there is 30 inches of clear vertical space below the hole for free movement of the hose.
PAGE 4
www.rohlhome.com SPARE PARTS Care and Maintenance: After use, wipe down with a soft, dry cloth. For all chrome plated surfaces clean this product with warm soapy water and then dry with a dry soft cloth. Nickel plated, satin and Inca brass finishes should be cleaned with a soft cloth and warm water. Then dry with a dry soft cloth.