Specification Sheet

ManualsBrandsRohl ManualsRohl CollectionsRohl Modern Lux 0.5 GPM Deck Mounted Cold Water Dispenser Faucet with Brass Lever Handle

LUX™ C-SPOUT FILTER FAUCET

R7517

HRK-2000

Consult your local House of Rohl showroom for additional information and specications. For complete warranty details and a list of showrooms, go to houseofrohl.com

FEATURES

• Stainless Steel construction

• 10 ½” height & 5 ½” reach swivel spout

• 1/4-turn ceramic disc control cartridges

• 1/4” compression connection not included

• 5 GPM at 45 PSI

• 1 3/8” diameter max hole cutout

• Not suitable for R.O. systems or as a hot water

dispenser

• Authentically crafted in New Zealand

COLORS/FINISHES WARRANTY

• Limited Lifetime

(*) 5-Year Limited Warranty

• Polished Chrome

• Polished Nickel

• Satin Nickel

• Matte Black*

• Stainless Steel

Summary of content (4 pages)

PAGE 1
LUX™ C-SPOUT FILTER FAUCET R7517 FEATURES • • • • • • • Stainless Steel construction 10 ½” height & 5 ½” reach swivel spout 1/4-turn ceramic disc control cartridges 1/4” compression connection not included 5 GPM at 45 PSI 1 3/8” diameter max hole cutout Not suitable for R.O.
PAGE 2
www.rohlhome.com SPARE PARTS Installation Instructions Note: Fits a maximum bench thickness of 2 1/2inches. Cut-out size minimum 1/2”, maximum 1 1/2”. 1. 2. 3. 4. 5. Flush pipe work to ensure it is free from debris. Cut a mounting hole as per cut-out above in the desired position for the faucet. Remove mounting nut #4.5, steel washer #4.4 and rubber washer #4.3 from filter tap. Position in bench top ensuring the base seal #3 is in place. From underneath the bench install the rubber washer #4.
PAGE 3
www.rohlhome.com SPARE PARTS LUX™ KITCHEN SINGLE SIDE LEVER FILTER FAUCET R7517 LUX INSTALLATION INSTRUCTIONS Please leave this form with the product once installed. SYSTEM REQUIREMENTS To ensure the optimum performance and customer satisfaction please adhere to the following:  Flush out all pipe work prior to installation.
PAGE 4
INSTALLATION INSTRUCTIONS Care and Maintenance: After use, wipe down with a soft, dry cloth. For all chrome plated surfaces clean this product with warm soapy water and then dry with a dry soft cloth. Nickel plated, satin and Inca brass finishes should be cleaned with a soft cloth and warm water. Then dry with a dry soft cloth.